Numerical modelling of flow pattern for high swirling flows

experimental and numerical modelling of flow pattern on

abstract weirs are the most common structures for discharge measurement in engineering research. streamline curvature, non hydrostatic pressure distribution on weir and nappe adherence to the weir lead to differences between calculated and measured discharges. thus discharge coefficient, which is the ratio of real and theoretic discharges, is usually less than unity. in circular weirs the press...

Direct numerical simulation of Open Von Kármán Swirling Flow

Direct numerical simulations are used to investigate the Open Von Kármán Swirling Flow, a new type of unsteady three-dimensional flow that is formed between two counter-rotating coaxial disks with an axial extraction enclosed by a cylinder chamber. Solution verification shows that monotonic convergence is achieved on three systematically refined grids for average pressure at the disk periphery ...

Investigation of Swirling and Tumbling Flow Pattern of Spark Ignition Engine

Gas motion within the cylinder is one of the major factors that control the combustion process in spark ignition engine. It also has significant impact on heat transfer. Both the bulk gas motion and the turbulence characteristics of the flow are important and governing the overall behavior of the flow. An arrangement for obtaining a stratified charge, using port injection, is proposed for a ...

Numerical Simulation of a Confined Swirling Flow in a Model Gas Turbine Combustor

Numerical modelling of foam Couette flows.

A numerical computation based on a tensorial visco-elasto-plastic model based on continuous mechanics is compared to experimental measurements on liquid foams for a bidimensional Couette flow between two glass plates, both in stationary and transient cases. The main features of the model are elasticity up to a plastic yield stress, and viscoelasticity above it. The effect of the friction of the...