Numerical Modelling of Crack Growth in a Gear Tooth Root
نویسندگان
چکیده
منابع مشابه
Predicting Depth and Path of Subsurface Crack Propagation at Gear Tooth Flank under Cyclic Contact Loading
In this paper, a two-dimensional computational model is proposed for predicting the initiation position and propagation path of subsurface crack of spur gear tooth flank. In order to simulate the contact of teeth, an equivalent model of two contacting cylinders is used. The problem is assumed to be under linear elastic fracture mechanic conditions and finite element method is used for numerical...
متن کاملDetection of fatigue crack growth in aircraft landing gear
Preliminary testing of a complete landing gear under fatigue test has demonstrated the applicability of the test using Acoustic Emission (AE) resonant sensors attached to the outer surface of the landing gear assembly. Attenuation trials were conducted which confirmed that attenuation through the main casing is low and provided data for optimisation of sensor positioning. Background noise level...
متن کاملNonlinear Dynamics Analysis of a Gear-Shaft-Bearing System with Breathing Crack and Tooth Wear Faults
Considering backlash, time-varying mesh stiffness and radial clearance of bearing, nonlinear dynamic model of gear bearing flexible shaft system is established taking into account breathing crack in shaft and tooth wear. Nonlinear dynamic equations are solved by Runge-Kutta method. Effect of backlash, crack in shaft and tooth wear faults on the nonlinear dynamic behavior of gear-shaft-bearing s...
متن کاملModelling of Crack Growth Using a New Fracture Criteria Based Peridynamics
Peridynamics (PD) is a nonlocal continuum theory based on integro-differential equations without spatial derivatives. The elongation fracture criterion is implicitly incorporated in the PD theory, and fracture is a natural outcome of the simulation. On the other hand, a new fracture criterion based on the crack opening displacement combined with peridynamic (PD-COD) is proposed. When the relati...
متن کاملForeword: Advances in Crack Growth Modelling
Fatigue failure of strucutres is normally caused by cracks that extend beyond a safe size. Flaws are present to some extend in all structural parts, either as a result of manufacturing fabrication defects or damage in service. Crack growth is a complex phenomenon to model and simplifications are assumed. In recent years, there has been an increasing realisation that advanced computational metho...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Strojniški vestnik – Journal of Mechanical Engineering
سال: 2011
ISSN: 0039-2480
DOI: 10.5545/sv-jme.2009.127