Numerical Modelling and Optimization of Dry Orthogonal Turning of Al6061 T6 Alloy
نویسندگان
چکیده
منابع مشابه
Stress Analysis of Switchover Module with Al6061-T6 and Al7075-T6 for Hybrid Locomotion Mobile Robot
This study presents the design and stress analysis of mobile robot switchover module (track tensioner), which helps the robot to work in hybrid locomotion mechanism. The track tensioner is a loading and unloading module that helps the locomotion system transformability while robot moves either on wheel or track mechanism. The selection of suitable material for its design, the model is therefore...
متن کاملMulti Objective Optimization during Turning of EN24 Alloy Steel
The paper envisages the study to optimize the effects of process variables on surface roughness, MRR and power consumption of En24 of work material using PVD coated tool. In the present investigation the influence of spindle speed, feed rate, and depth of cut were studied as process parameters. The experiments have been conducted using full factorial design in the design of experiments (DOE) on...
متن کاملNumerical Modelling of Dynamic Compaction in Dry Sandy Soils for Determination of Effective Print Spacing
Dynamic compaction (DC) is a widely used soil improvement method in dry and/or saturated soils. The design of DC treatment is usually carried out based on the past experiences and empirical relations. In order to clarify the ambiguities in DC processes, numerical modeling of DC in dry granular soils has been considered using a dynamic finite element code. Using the developed model, two design c...
متن کاملModelling and Numerical Simulation of Cutting Stress in End Milling of Titanium Alloy using Carbide Coated Tool
Based on the cutting force theory, the cutting stress in end milling operation was predicted satisfactorily through simulation of using finite element method. The mechanistic force models were introduced in high accuracy force predictions for most applications. The material properties in the simulations were defined based on the cutting force theory, as a function of strain and strain rate wher...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Periodica Polytechnica Mechanical Engineering
سال: 2018
ISSN: 1587-379X,0324-6051
DOI: 10.3311/ppme.11347