Numerical modeling of multilayer film coextrusion with experimental validation
نویسندگان
چکیده
منابع مشابه
Viscoelastic flow effects in multilayer polymer coextrusion
• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version ...
متن کاملExperimental and Theoretical Analysis of Interfacial Instabilities in Coextrusion Process of Multilayer Functionalized Polymers
Coextrusion technologies are commonly used to produce multilayered composite sheets or films with a large range of applications. The contrast of rheological properties between layers can lead to interfacial instabilities during flow. Important theoretical and experimental advances have been made during the last decades on the stability of compatible and incompatible polymers using a mechanical ...
متن کاملCFD Modeling of TiO2 Nano-Agglomerates Hydrodynamics in a Conical Fluidized Bed Unit with Experimental Validation
In the computational fluid dynamics (CFD) modeling of gas-solids two phase flow, the effect of boundary conditions play an important role in predicting the hydrodynamic characteristics of fluidized beds. In this work, the hydrodynamics of conical fluidized bed containing dried TiO2 nano-agglomerates were studied both experimentally and computationally. The pressure drop ...
متن کاملMultilayer Perceptron Adaptive Dynamic Control of Mobile Robots: Experimental Validation
This paper presents experimental results acquired from the implementation of an adaptive control scheme for nonholonomic mobile robots, which was recently proposed by the same authors and tested only by simulations. The control system comprises a trajectory tracking kinematic controller, which generates the reference wheel velocities, and a cascade dynamic controller, which estimates the robot’...
متن کاملValidation of Erosion Modeling: Physical and Numerical
The overall intent of this research is to develop numerical models of erosion of levees, dams and embankments, validated by physical models. The physical models are performed at 1-g and at high g’s using a geotechnical centrifuge. The erosion is modeled in detail, from beginning to end, that is from the time the levee is overtopped until the levee is breached. Typical quantities measured as a f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Engineering & Science
سال: 2014
ISSN: 0032-3888
DOI: 10.1002/pen.24022