NUMERICAL MODELING OF HEAVY HYDROCARBON LIQUID HEATING
نویسندگان
چکیده
منابع مشابه
NUMERICAL MODELING OF THE COMBUSTION SYNTHESIS OF TiAl/Al2O3 COMPOSITE VIAMICROWAVE HEATING
Abstract: Microwave processing is one of the novel methods for combustion synthesis of intermetallic compounds andcomposites. This method brings about a lot of opportunities for processing of uniquely characterized materials. In thisstudy, the combustion synthesis of TiAl/Al2O3 composite via microwave heating has been investigated by thedevelopment of a heat transfer model including a microwave...
متن کاملOlefin Production from Heavy Liquid Hydrocarbon Thermal Cracking: Kinetics and Product Distribution
Thermal cracking of a heavy liquid hydrocarbon was performed in a laboratory scale tubular reactor. Central Composite Design (CCD), was used as an experimental design method. The design variables were Coil Outlet Temperature (COT), feed flow and rate steam ratio. Maximum yield of ethylene was 30.37 wt% at COT, residence time and steam ratio of 869oC, 0.208 s and 1.22 g/g, respect...
متن کاملNumerical Modeling of Single-Chamber SOFCs with Hydrocarbon Fuels
A two-dimensional numerical model of a single-chamber solid oxide fuel cell SCFC operating on hydrocarbon fuels is developed. The SCFC concept is a simplification of a conventional solid oxide fuel cell in which the anode and cathode are both exposed to the same premixed fuel-air mixture, and selective catalysts promote electrochemical oxidation of the fuel at the anode and simultaneous electro...
متن کاملExperimental Study and CFD Modeling of the Ohmic Heating Process in a Static Two-Phase Biosolid – Liquid System
The effective parameters on Ohmic heating in static system containing biosolid-water were studied. The effects of distribution of particles, salinity and electric field strength on electrical conductivity,</e...
متن کاملHydrocarbon Liquid Flow Calibration Service
This document provides a description of a 2 liter hydrocarbon liquid flow calibration standard operated by the National Institute of Standards and Technology (NIST) Fluid Metrology Group to provide flowmeter calibrations for customers. This facility uses a passive piston prover technique where fluid is driven by pumps while the measuring piston is pushed by the fluid over a measured length duri...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Brazilian Journal of Chemical Engineering
سال: 2016
ISSN: 0104-6632
DOI: 10.1590/0104-6632.20160331s20140101