Numerical modeling of a high-enthalpy shock tunnel driven by gaseous detonation
نویسندگان
چکیده
منابع مشابه
A Shock Tube Driven Transonic Wind Tunnel
A small transonic wind tunnel was designed, constructed and calibrated in order to provide a tool for the study and demonstration of transonic flow phenomena. The wind tunnel makes use of flow properties following the propagation of a shock wave along a tube in order to create the transonic flow. This is in contrast to conventional transonic facilities which are supplied from a reservoir or com...
متن کاملNumerical Solution Methods for Shock and Detonation Jump Conditions
Selected algorithms are described for the numerical solution of shock and detonation jump conditions in ideal gas mixtures with realistic thermochemical properties. An iterative technique based on a two-variable Newton’s method is selected as being the most robust method for both reactive and nonreactive flows. In the implementations of this solution algorithm, we have used the Cantera software...
متن کاملDetonation shock dynamics and comparisons with direct numerical simulation
Comparisons between direct numerical simulation (DNS) of detonation and detonation shock dynamics (DSD) is made. The theory of DSD defines the motion of the detonation shock in terms of intrinsic geometry of the shock surface, in particular for condensed phase explosives the shock normal velocity, Dn, the normal acceleration, Ḋn, and the total curvature, κ. In particular, the properties of thre...
متن کاملDetonation driver for enhancing shock tube performance
The development of a shock-induced detonation driver for enhancing the performance of a shock tube is described. The detonation wave is induced by the expansion of helium or air. Various gaseous fuel–oxidizer combinations are examined. This method produces a detonation wave which propagates downstream that transitions into a shock wave in the driven section. High-enthalpy flows with a maximum t...
متن کاملNumerical Investigation on the Effect of Tunnel Height on Drag Reduction in a High Speed Trimaran
There are different methods to reduce drag in high speed hulls. One of these methods is a change in the shape of the body by adding longitudinal side tunnels. In this paper it has been attempted to determine the influence of the tunnel height on hydrodynamic characteristics of the hull to achieving an optimum shape for the tunnel. To achieve this purpose, numerical simulation of the problem has...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Aerospace Science and Technology
سال: 2020
ISSN: 1270-9638
DOI: 10.1016/j.ast.2020.105958