Numerical modeling and validation of Aluminium Friction Stir Welding (FSW) process during railcar manufacturing
نویسندگان
چکیده
منابع مشابه
Emission of nanoparticles during friction stir welding (FSW) of aluminium alloys.
Friction stir welding (FSW) is now well established as a welding process capable of joining some different types of metallic materials, as it was (1) found to be a reliable and economical way of producing high quality welds, and (2) considered a "clean" welding process that does not involve fusion of metal, as is the case with other traditional welding processes. The aim of this study was to de...
متن کاملNumerical modeling of friction stir welding process: a literature review
This survey presents a literature review on friction stir welding (FSW) modeling with a special focus on the heat generation due to the contact conditions between the FSW tool and the workpiece. The physical process is described and the main process parameters that are relevant to its modeling are highlighted. The contact conditions (sliding/sticking) are presented as well as an analytical mode...
متن کاملAn Overview of Friction Stir Welding (FSW): A New Perspective
Friction Stir Welding (FSW), being a novel process and facilitates welding various joints required for several industrial applications. It is an attractive technology for solid state material joining, contrary to conventional welding methods, having ability to produce welds with higher integrity and minimum induced distortion and residual stresses. In this paper, the operation of FSW, critical ...
متن کاملOptimization of process parameters during Friction Stir Welding of Aluminium 5083 & 6082 Alloys
The paper deals with the optimization of welding parameters of friction stir welding of different Aluminium alloy groups. For this purpose 5 series Aluminium alloy Al 5083 and 6 series Aluminium alloy Al 6062 were taken .Tensile Strength test and micro structure analysis under various rotating speeds and tool profiles is conducted. It is observed that the increase in tool rotation speed and the...
متن کاملComputational Modeling of Friction Stir Welding
Friction stir welding (FSW) is a relatively new, solid-state, metal joining process invented by Wayne Thomas et al. at the Welding Institute of England (now TWI) in 1991 [1.] A FSW butt weld is made by following the joint-line of two butted pieces of material with a rotating tool while applying a significant down-force through the tool. Heating is provided at or near the tool-work interface by ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2021
ISSN: 2212-8271
DOI: 10.1016/j.procir.2020.05.197