Numerical investigation on turbulent forced convection and heat transfer characteristic in spirally semicircle-grooved tube
نویسندگان
چکیده
منابع مشابه
Analysis of variance of nanofluid heat transfer data for forced convection in horizontal spirally coiled tubes
In the present study, an experimental study is carried out to investigate the effect of adding Al and Cu nanoparticles to the base fluid (water) on the heat transfer rate in a spirally coiled tube. The spirally coiled tube is fabricated from the straight copper tube with the inner and outer coil diameters of 100 and 420 mm, respectively. The experiments have been done for water and two types of...
متن کاملnumerical study on turbulent mixed convection heat transfer and pressure drop of nanofluid in vertical helically coiled tube heat exchanger
0
متن کاملAn Investigation into Forced Convection Heat Transfer through Porous Media
Theoretical and experimental investigations of forced convection heat transfer from a heated flat plate embedded in porous media with a constant heat flux had been carried out in the present work. The experimental investigation included a set of experiments carried out to study the effect of Reynolds number and heat flux on the temperature profile and local Nusselt number. The investigation cov...
متن کاملInvestigation on Turbulent Nanofluid Flow in Helical Tube in Tube Heat Exchangers
In this study, the thermal characteristics of turbulent nanofluid flow in a helical tube in the tube heat exchanger (HTTHE) were assessed numerically through computational fluid dynamics (CFD) simulation. The findings of both the turbulent models: realizable k-epsion (k-ε) and re-normalisation group (RNG) k-epsilon were compared. The temperature distribution contours show that realizable and RN...
متن کاملNumerical investigation on the effects of six control rods arranged in equilateral triangular configurations on fluid flow and forced convection heat transfer from a circular cylinder
The present work deals with heat transfer characteristics as well as fluid flow patterns in laminar flow regime for a circular cylinder with six control rods arranged in equilateral triangular geometries. The computations have been carried out by a finite volume approach using the overset grid method. The unsteady flow at Re= 200 and Pr= 0.7 and 7.0 was examined. The effect of the control rods ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Mechanical and Materials Engineering
سال: 2016
ISSN: 1823-0334,2198-2791
DOI: 10.1186/s40712-016-0062-2