Numerical Investigation on Reduced Moment Resistance and Increased Reinforcement Spacing in Reinforced Concrete Wall Subjected to Blast Load
نویسندگان
چکیده
Numerical investigation becomes a highly demanding tool for the best design in engineering. With one validated numerical result available, further is possible to conduct. Especially, expensive and limited access civilian conduct test like blast experiment. capability of Arbitrary Lagrange Euler (ALE) solver coupling approach between structure air AUTODYN, detail three-dimensional assessment RC wall on reduced moment resistance increased reinforcement spacing are conducted. The has cross-sectional dimension 1829 mm x 1219 with thickness 305 strip footing. It subjected 13.61 kg Trinitrotoluene (TNT) explosive at 1.21 m standoff distance from centre. impact indicated, although horizontal vertical flexural reinforcements simulated walls, it capable demonstrating an equivalent strength tested
منابع مشابه
Numerical and Experimental Investigations on the Behavior of Steel-reinforced Concrete Columns Subjected to Eccentric Loading
Steel-reinforced concrete (SRC) columns, which are classified as composite columns, became the most widely used in recent years; because of their extensive advantages over the reinforced concrete and the steel columns. In this paper, the ductility index and its influential factors were explored to investigate the behavior of SRC columns. A straightforward approach was then proposed by establish...
متن کاملNumerical Investigation of Structural Response of Corrugated Blast Wall Depending on Blast Load Pulse Shapes
Hydrocarbon explosions are one of most hazardous events for workers on offshore platforms. To protect structures against explosion loads, corrugated blast walls are typically installed. However, the profiles of real explosion loads are quite different depending on the congestion and confinement of Topside structures. As the level of congestion and confinement increases, the explosion load incre...
متن کاملCalibration of Load and Resistance Factors for Reinforced Concrete
Current approach for designing of reinforced concrete members is based on the load and resistance factor. However the load and resistance parameters are random variables, the constant values have been designated for them in the designing procedure. Assuming these factors as the constants, will be led to the unsafe and uneconomical designs. Safe designing of structures requires appropriate recog...
متن کاملSimulation of the Reactive Powder Concrete (RPC) Behavior Reinforcing with Resistant Fiber Subjected to Blast Load
In research or experimental works related to blast loads, the amount of explosion material and distance of explosion point are very important. So, in this paper has been attempted to present a parametric study of the reactive powder concrete subjected to blast load. The effect of the different amount of TNT adopted the literature, distance of explosion point from RPC slab and also the location ...
متن کاملNumerical Study of Progressive Collapse in Intermediate Moment Resisting Reinforced Concrete Frame Due to Column Removal
Progressive collapse is a chain reaction of failures propagating throughout a portion of the structure disproportionate to the original local failure occurring when a sudden loss of a critical load‐bearing element initiates a structural element failure, eventually resulting in partial or full collapse of the structure. Both General Services Administration (GSA) and United States Department of D...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Integrated Engineering
سال: 2022
ISSN: ['2229-838X', '2600-7916']
DOI: https://doi.org/10.30880/ijie.2022.14.01.032