Numerical investigation of two-phase natural convection and temperature stratification phenomena in a rectangular enclosure with conjugate heat transfer

Natural Convection Heat Transfer within Octagonal Enclosure

The problem of steady, laminar and incompressible natural convection flow in an octagonalenclosure was studied. In this investigation, two horizontal walls were maintained at a constant hightemperature, two vertical walls were kept at a constant low temperature and all inclined walls wereconsidered adiabatic. The enclosure was assumed to be filled with a Bousinessq fluid. The studyincludes comp...

Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure

A numerical study of the natural convection of the laminar heat transfers in the stationary state was developed in a horizontal ring and compared between a heated trapezoidal internal cylinder and a cold elliptical outer cylinder. This annular space is traversed by a Newtonian and incompressible fluid. The Prandtl number is set to 0.7 (air case) for different Rayleigh numbers. The system of equ...

Natural Convection Heat Transfer from a Rectangular Block Embedded in a Vertical Enclosure

A Numerical Modeling for Natural Convection Heat Transfer in Porous Media With Generated Internal Heat Sources

In this paper a numerical method is used to study the unsteady state natural convection heat transfer within a confined porous media with uniform internal heat generation. The governing equations based on the Darcy model and Bossiness approximations are solved, using the finite difference Alternating Direction Implicit (ADI) method. The developed program was used to simulate natural convection ...

Numerical Investigation into Natural Convection Heat Transfer Enhancement of Copper-water Nanofluid in a Wavy Wall Enclosure

Numerical investigations are performed into the natural convection heat transfer characteristics within a wavy-wall enclosure filled with Cu-water nanofluid. In the paper, the bottom wall of the enclosure has a wavy geometry and is maintained at a constant high temperature, while the top wall is straight and is maintained at a constant low temperature. The left and right walls of the enclosure ...