Numerical Investigation of Tungsten Reduction Process
نویسندگان
چکیده
منابع مشابه
Numerical and analytical investigation of an ultrasonic assisted ECAP process
One of the great challenges in the processing of materials using Equal Channel Angular Pressing (ECAP) is the high forming forces required to produce large shear deformation in the material. Researchers show that the friction forces between the die and the sample constitute a great part of the total forming forces. Recently, ultrasonic vibrations are successfully implemented into the ECAP proce...
متن کاملEXPERIMENTAL AND NUMERICAL INVESTIGATION ON LASER BENDING PROCESS
Laser bending is an advanced process in sheet metal forming in which a laser heat source is used to shape the metal sheet. In this paper, temperature distribution in a mild steel sheet metal is investigated numerically and experimentally. Laser heat source is applied through curved paths in square sheet metal parts. Finite element (FE) simulation is performed with the ABAQUS/CAE standard softwa...
متن کاملan investigation of the types of text reduction in subtitling: a case study of the persian film gilaneh with english subtitles
چکیده ندارد.
15 صفحه اولNumerical Investigation of Pileup Process in Metal Microdroplet Deposition Manufacture
This paper presents a systematic numerical investigation of the transient transport phenomenon during the pileup of molten metal droplets on the substrate. The physical mechanisms of the pileup process, including the bulk liquid, capillarity effects at the liquid-solid interface, heat transfer, and solidification, are identified and quantified numerically. The droplet diameter is 100 μm, and th...
متن کاملNumerical and Experimental Investigation of Convex Laser Forming Process
Abstract Laser forming is a flexible sheet metal forming technique using laser-induced thermal deformation to shape sheet metal without hard tooling or external forces. Concave laser forming can be readily achieved, while convex forming may occur through buckling, but the buckling direction heavily depends on the sheet surface and pre-strain condition. A new laser scanning scheme is postulated,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2018
ISSN: 2261-236X
DOI: 10.1051/matecconf/201819401019