Numerical investigation of three-dimensional separation control in an axial compressor cascade
نویسندگان
چکیده
منابع مشابه
One-Dimensional design of a three-stage axial compressor with Its 3D numerical simulation
The purpose of this study is to design a three-stage axial compressor with identical pressure ratio which makes an adequate pressure ratio and efficiency in design point conditions with rotational velocity of 38000rpm and mass flow rate of 3.2kg/s. First of all, considering some restrictions such as Dehaller number more than 0.7 in all sections of the stator and the rotor, and relative Mach num...
متن کاملNumerical Investigation of Rotating-Stall in a Stage of an Axial Compressor with Two Different Approaches
An unsteady two-dimensional finite-volume solver was developed based on Van Leer’s flux splitting algorithm in conjunction with “Monotonic Upstream Scheme for Conservation Laws (MUSCL)” limiters and the two-layer Baldwin-Lomax turbulence model was also implemented. To validate the solver, two test cases were prepared and the computed results had good agreements with reference data. The rotating...
متن کاملA Numerical Investigation on the Unstable Flow in a Single Stage of an Axial Compressor
An unsteady two-dimensional finite-volume solver was developed based on Van Leer’s flux splitting algorithm in conjunction with “Monotonic Upstream Scheme for Conservation Laws (MUSCL)” limiters to improve the order of accuracy and the two-layer Baldwin-Lomax turbulence model was also implemented. Two test cases were prepared to validate the solver. The computed results were compared with the e...
متن کاملone-dimensional design of a three-stage axial compressor with its 3d numerical simulation
the purpose of this study is to design a three-stage axial compressor with identical pressure ratio which makes an adequate pressure ratio and efficiency in design point conditions with rotational velocity of 38000rpm and mass flow rate of 3.2kg/s. first of all, considering some restrictions such as dehaller number more than 0.7 in all sections of the stator and the rotor, and relative mach num...
متن کاملA 2-D Numerical Investigation on the Modal Characteristics of Rotating-Stall with a Variable-Cascade- Length Approach in an Axial Compressor
The Rotating-Stall (RS) through a rotor-cascade of an axial compressor were numerically investigated with an unsteady two-dimensional finite-volume density based computer code. To validate the computer code, a test case was prepared and the good agreement of the compared results has given the adequate assurance of the code. The RS was incepted with a 40% reduction in flow coefficient and a 0.4%...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Heat and Technology
سال: 2017
ISSN: 0392-8764,0392-8764
DOI: 10.18280/ijht.350325