Numerical investigation of nanofluids forced convection in circular tubes
نویسندگان
چکیده
منابع مشابه
Numerical Simulation of Forced Convection of Nanofluids by a Two-Component Nonhomogeneous Model
Nanofluids, in which nano-sized particles (typically less than 100 nm) are suspended in liquids, have emerged as a possible effective way of improving the heat transfer performance of common fluids. In this paper a numerical study is performed to analyze the wall shear stress and heat transfer coefficient of γAl2O3-water nanofluids under laminar forced convection through a circular pipe. It is ...
متن کاملThree-dimensional optimization of staggered finned circular and elliptic tubes in forced convection
This paper presents a three-dimensional numerical and experimental geometric optimization study to maximize the total heat transfer rate between a bundle of finned tubes in a given volume and external flow, for staggered arrangements of circular and elliptic tubes. Experimental results were obtained for circular and elliptic configurations with twelve tubes, starting with an equilateral triangl...
متن کاملAnalysis of variance of nanofluid heat transfer data for forced convection in horizontal spirally coiled tubes
In the present study, an experimental study is carried out to investigate the effect of adding Al and Cu nanoparticles to the base fluid (water) on the heat transfer rate in a spirally coiled tube. The spirally coiled tube is fabricated from the straight copper tube with the inner and outer coil diameters of 100 and 420 mm, respectively. The experiments have been done for water and two types of...
متن کاملNumerical investigation on the effects of six control rods arranged in equilateral triangular configurations on fluid flow and forced convection heat transfer from a circular cylinder
The present work deals with heat transfer characteristics as well as fluid flow patterns in laminar flow regime for a circular cylinder with six control rods arranged in equilateral triangular geometries. The computations have been carried out by a finite volume approach using the overset grid method. The unsteady flow at Re= 200 and Pr= 0.7 and 7.0 was examined. The effect of the control rods ...
متن کاملanalytical and numerical investigation of the deformation length in roll forming process of circular tubes
deformation length is one of the most important parameters in cold roll-forming process, which plays a fundamental role in determining the inter-distance between the stations and rate of deformation. deformation length was first introduced by bhattacharyya. he also obtained a closed-form relation for this length in roll-forming of symmetric channel section. in this paper, deformation length in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Thermal Engineering
سال: 2009
ISSN: 1359-4311
DOI: 10.1016/j.applthermaleng.2009.06.019