Numerical investigation of Miller cycle with EIVC and LIVC on a high compression ratio gasoline engine
نویسندگان
چکیده
منابع مشابه
Effect of Ignition Timing, Equivalence Ratio, and Compression Ratio on the Performance and Emission Characteristics of a Variable Compression Ratio Si Engine using Ethanol-Unleaded Gasoline Blends
This paper investigates the effect of ethanol-unleaded gasoline blends (E0,E10,E25,E35,andE65) computer interfaced, four-stroke single cylinder compression ignition engine. The said engine wasconverted to spark ignition and carburetion to suit ethanol fuel. A suitable provision was provided on theengine to vary the compression ratio thereby making the engine adaptable to operate at lowercompres...
متن کاملNumerical investigation of the variation of compression ratio on performance and exhaust emission of a turbo-diesel engine
Changing the compression ratio and presence of turbocharger are two important issues, affecting on performance, and exhaust emissions in internal combustion engines. To study the functional properties and exhaust emissions in regards to compression ratio at different speeds, the numerical solution of the governing equations on the fluid flow inside the combustion chamber and the numerical solut...
متن کاملEffect of Injection Characteristics on Emissions and Combustion of a Gasoline Fuelled Partially-premixed Compression Ignition Engine
Conventional compression ignition (CI) engines are known for their high thermal efficiency compared to spark ignited (SI) engines. Gasoline because of its higher ignition delay has much lower soot emission in comparison with diesel fuel. Using double injection strategy reduces the maximum heat release rate that leads to NOx emission reduction. In this paper, a numerical study of a gasoline fuel...
متن کاملFuzzy Air-Fuel Ratio Control of a Small Gasoline Engine
This paper describes an investigation in which a fuzzy control paradigm was applied to a small spark-ignition gasoline-fuelled internal-combustion engine, to achieve regulation of the fuel injection system. The control system determined the amount of fuel required from a fuzzy algorithm that used the engine speed and manifold air pressure as input values. The parameters of the fuzzy system cons...
متن کاملFinite-Time Thermodynamic Modeling and a Comparative Performance Analysis for Irreversible Otto, Miller and Atkinson Cycles
Finite-time thermodynamic models for an Otto cycle, an Atkinson cycle, an over-expansion Miller cycle (M1), an LIVC Miller cycle through late intake valve closure (M2) and an LIVC Miller cycle with constant compression ratio (M3) have been established. The models for the two LIVC Miller cycles are first developed; and the heat-transfer and friction losses are considered with the effects of real...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science Progress
سال: 2021
ISSN: 0036-8504,2047-7163
DOI: 10.1177/00368504211023640