Numerical investigation of inter-linked parallel micro-channel heat sinks
نویسندگان
چکیده
منابع مشابه
Transport Phenomena in Two-Phase Micro-Channel Heat Sinks
The design and reliable operation of a two-phase micro-channel heat sink require a fundamental understanding of the complex transport phenomena associated with convective boiling in small, parallel coolant passages. This understanding is the primary goal of this paper. This goal is realized by exploring the following aspects of boiling in microchannels: hydrodynamic instability, two-phase flow ...
متن کاملFlow boiling heat transfer in two-phase micro-channel heat sinks––I. Experimental investigation and assessment of correlation methods
This paper is the first of a two-part study concerning measurement and prediction of saturated flow boiling heat transfer in a water-cooled micro-channel heat sink. In this paper, new experimental results are discussed which provide new physical insight into the unique nature of flow boiling in narrow rectangular micro-channels. The micro-channel heat sink contained 21 parallel channels having ...
متن کاملMeasurement and correlation of critical heat flux in two-phase micro-channel heat sinks
Critical heat flux (CHF) was measured for a water-cooled micro-channel heat sink containing 21 parallel 215· 821 lm channels. Tests were performed with deionized water over a mass velocity range of 86–368 kg/ms, inlet temperatures of 30 and 60 C, at an outlet pressure of 1.13 bar. As CHF was approached, flow instabilities induced vapor backflow into the heat sink’s upstream plenum, which signif...
متن کاملAnalysis of three-dimensional heat transfer in micro-channel heat sinks
In this study, the three-dimensional fluid flow and heat transfer in a rectangular micro-channel heat sink are analyzed numerically using water as the cooling fluid. The heat sink consists of a 1-cm silicon wafer. The micro-channels have a width of 57 lm and a depth of 180 lm, and are separated by a 43 lm wall. A numerical code based on the finite difference method and the SIMPLE algorithm is d...
متن کاملPrediction and measurement of incipient boiling heat flux in micro-channel heat sinks
Experiments were performed to measure the incipient boiling heat flux in a heat sink containing 21 rectangular (231 lm wide and 713 lm deep) micro-channels. Tests were performed using deionized water with inlet liquid velocities of 0.13–1.44 m/s, inlet temperatures of 30, 60 and 90 C, and an outlet pressure of 1.2 bar. Using a microscope, boiling incipience was identified when the first bubbles...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2021
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/1091/1/012071