Numerical Investigation of Forming Limit of Sheet Metals due to Shear Band Localization. 2nd Report. Forming Limit Strain of Bonded Sheet Metals.
نویسندگان
چکیده
منابع مشابه
experimental and numerical investigation of forming limit diagram of 6061 aluminum sheet
because of high strength to weight ratio, 6061 aluminum has many applications in different industries like automotive and aerospace industries and can help to reduction of fuel consumption. forming limit diagram (fld) is a useful method for sheet metal formability identification. whereas calculation of forming limit diagram by experimental tests is expensive and time consumption, in the present...
متن کاملImproved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming
Ultrasonic energy is used for applying severe plastic deformation on metal surfaces. In the present work, the effect of ultrasonic vibration on the formability, microhardness and microstructural proper...
متن کاملinvestigation of forming limit and weld line movement in the forming of tailor welded blanks using experiment and numerical methods
the forming limit diagram (fld) is a useful method for characterizing the formability of sheet metals. in this paper, different numerical models were used to investigate the fld of tailor welded blank (twb). twbs were co2 laser-welded samples of interstitial-free (if) steel sheets with different thicknesses. the results of the numerical models were compared with the experimental fld as well as ...
متن کاملanalysis of forming parameters in sheet hydro-forming process
the aim of this paper is to develop a systematic method to analyze the effects of forming parameters on the quality of part formability and determine the optimal combination of the forming parameters for the sheet hydroforming process. in this paper, the effects of four important process parameters namely fluid pressure, friction coefficient at blank/punch interface, gap between die rim block a...
متن کاملDetermination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis
In this study, "Buckling Limit of Strain" (B.L.S.) is introduced as one of the most important limiting factors in cold roll forming process. B.L.S. is calculated by the finite element procedure. Then for two particular processes with existing analysis and experimental results, B.L.S. has been determined and evaluated. LUSAS 12.3 is used for finite element analysis. The results show that when bu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1996
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.62.569