Numerical Investigation of Bolted Hybrid Steel-Timber Connections
نویسندگان
چکیده
منابع مشابه
Numerical Analysis of Cyclic Behavior of Beam-To-Column Bolted Connections in Steel Frames
This article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. As the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. Four different specimens have been analyzed. These models had some differences such as bolt arrangement and the presence or a...
متن کاملStructural behavior of cold-formed stainless steel bolted connections
This paper presents a series of tests on cold-formed stainless steel bolted connections. The test specimens were fabricated from three different types of stainless steel, including austenitic stainless steel EN1.4301 (AISI 304) and EN1.4571 (AISI 316Ti having small amount of titanium) as well as lean duplex stainless steel EN1.4162 (AISI S32101). The material properties of the three types of st...
متن کاملnumerical analysis of cyclic behavior of beam-to-column bolted connections in steel frames
this article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. as the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. four different specimens have been analyzed. these models had some differences such as bolt arrangement and the presence or a...
متن کاملLoad-carrying behaviour of steel-to-timber dowel connections
This paper details tests on steel-wood-steel connections with thin dowels carried out at the University of British Columbia in Vancouver, Canada. Connections configurations were selected in such a way that the influence of the main parameters such as dowel slenderness ratio, dowel strength, fastener spacing and end distance and the number of dowels could be studied. An important issue of the pa...
متن کاملBolted Timber Joints with Self-tapping Screws
The use of self-tapping screws with continuous threads in the joint area as a reinforcement to avoid splitting of timber members is studied. A theoretical model is developed to calculate the stress distribution around a pin-loaded hole in a timber joint, to predict brittle failure modes in bolted connections and to calculate the load in the reinforcing screws. Laboratory experiments on reinforc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frontiers in Built Environment
سال: 2018
ISSN: 2297-3362
DOI: 10.3389/fbuil.2018.00048