Numerical Flow Analysis in a Rotating Square Duct and a Rotating Curved-Duct
نویسندگان
چکیده
منابع مشابه
A Numerical Study on Non-Isothermal Flow Through a Rotating Curved Duct with Square Cross Section
Abstract: Non-isothermal flow through a rotating curved duct with square cross section is studied numerically by using the spectral method, and covering a wide range of the Taylor number, Tr, 2000 0 Tr and Dean number, , Dn 0Dn 2000. A temperature difference is applied across the vertical sidewalls for Grashof number Gr = 500, where the outer wall is heated and the inner one cooled. The r...
متن کاملFluid flow and heat transfer characteristics in a curved rectangular duct using Al2O3-water nanofluid
In the present research, the laminar forced convective heat transfer and fluid flow characteristics for Al2O3-water nanofluid flowing in different bend (i.e., 180o and 90o) pipes have been investigated numerically in a three-dimensional computational domain using the finite volume technique. The effects of different pertinent parameters, such as the Reynolds number of the duct, volume fraction ...
متن کاملFlow Investigation in a Constant Area Curved Duct
The present study dealt with the wall static pressure of a rectangular curved duct with angle of turn 90° at all four faces with various locations. The normalized wall static pressure distributions at the top, bottom, inside and outside surfaces of the C-duct are drawn in the form of contours at three different air velocities, Uav = 20m/s, 40m/s and 60m/s respectively. These iso-bar contours in...
متن کاملCharacterisation of Marginally Turbulent Square Duct Flow
We have performed direct numerical simulation of fully developed turbulent flow in a straight duct with square cross-section. The main objective of the present study is to determine the minimal requirements for maintaining turbulence in duct flows [1]. A detailed analysis of this limit regime allows to elucidate the dominant mechanisms governing the marginally turbulent state, where the self-su...
متن کاملDevelopment of a novel method in TRMC for a Binary Gas Flow Inside a Rotating Cylinder
A new approach to calculate the axially symmetric binary gas flow is proposed Dalton’s law for partial pressures contributed by each species of a binary gas mixture (argon and helium) is incorporated into numerical simulation of rarefied axially symmetric flow inside a rotating cylinder using the time relaxed Monte-Carlo (TRMC) scheme and the direct simulation Monte-Carlo (DSMC) method. The res...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Rotating Machinery
سال: 2000
ISSN: 1023-621X
DOI: 10.1155/s1023621x00000014