Numerical and experimental study of bursting prediction in tube hydroforming of Al 7020-T6
نویسندگان
چکیده
منابع مشابه
Numerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming
Tube hydroforming (THF) process is used to produce the complex components from the initial cylindrical tubes. In this paper, T- shape component was formed using a tube hydroforming machine and the residual stresses of hydroformed tube was determined by hole drilling method. Subsequently, the thickness distribution and residual stresses of final tube were investigated using experimental and fini...
متن کاملNumerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming
Tube hydroforming (THF) process is used to produce the complex components from the initial cylindrical tubes. In this paper, T- shape component was formed using a tube hydroforming machine and the residual stresses of hydroformed tube was determined by hole drilling method. Subsequently, the thickness distribution and residual stresses of final tube were investigated using experimental and fini...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Theoretical and experimental study on the hydroforming of bifurcation tube
Hydroforming is one kind of plasticity working, which can be used to increase the diameter, to change the geometry, or to expand the outer walls of cylindrical shells or tubes. The forming principle of hydroforming is by using a die to constrain the outer geometry of a tube and then pumping high pressure oil into the inner tube, so as to force part of the tube to flow into the die cavity. In or...
متن کاملnumerical and experimental study of residual stress measurement and thickness distribution of t-shape steel tube produced by tube hydroforming
tube hydroforming (thf) process is used to produce the complex components from the initial cylindrical tubes. in this paper, t- shape component was formed using a tube hydroforming machine and the residual stresses of hydroformed tube was determined by hole drilling method. subsequently, the thickness distribution and residual stresses of final tube were investigated using experimental and fini...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanics & Industry
سال: 2017
ISSN: 2257-7777,2257-7750
DOI: 10.1051/meca/2017019