Numerical and experimental studies on wrinkling control methods of sheet metal part with high curvature and large flange in rubber forming

Adaptive Numerical Analysis of Wrinkling in Sheet Metal Forming

Hutchinson approach has been successfully used by a number of researchers in thin sheet metal forming processes for wrinkling prediction. However, Hutchinson approach is limited to regions of the sheet that are free of any contact. Therefore, a new wrinkling indicator that can be used in the contact areas is proposed. Discretisation error indicators are also used to present a comprehensive appr...

numerical and experimental study of parameters affecting metal forming using rubber pads, on parts with radius of curvature

production and preparation of many parts of the aircraft body including wings with long length, smooth form, and large radius of curvature are amongst the most important challenges in this industry. in this paper, the effective factors in the rubber pad forming method on a pieces contain curvature radius have been investigated by finite element method. the effect of variables such as curvature ...

Experimental and Numerical Studies of Sheet Metal Forming with Damage Using Gas Detonation Process

Gas detonation forming is a high-speed forming method, which has the potential to form complex geometries, including sharp angles and undercuts, in a very short process time. Despite many efforts being made to develop detonation forming, many important aspects remain unclear and have not been studied experimentally, nor numerically in detail, e.g., the ability to produce sharp corners, the effe...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Wrinkling Prediction Procedure in Thin Sheet Metal Forming Processes with Adaptive Mesh Refinement Part II : Wrinkling with contact Project Title Modelling of Sheet Metal Forming Project Number ME97033 Cluster Modelling of Forming of Metal and Laminate Products Author