Numerical and experimental investigations of additively manufactured lattice structures under quasi‐static compression loading
نویسندگان
چکیده
منابع مشابه
Parameter Study of GTN Model in a SLM Manufactured Lattice Structure under Compression by Using FEM
This study investigates the effect of material parameters of the Gurson-Tvergaard-Needleman (GTN) model on the failure prediction of cellular structures. The effect of elastic modulus, calibration parameter of GTN model, isotropic hardening, fracture strain, and strut diameter on the load-displacement curve of a lattice structure fabricated by Selective Laser Melting (SLM) has been studied by u...
متن کاملNumerical and Experimental Investigations on the Behavior of Steel-reinforced Concrete Columns Subjected to Eccentric Loading
Steel-reinforced concrete (SRC) columns, which are classified as composite columns, became the most widely used in recent years; because of their extensive advantages over the reinforced concrete and the steel columns. In this paper, the ductility index and its influential factors were explored to investigate the behavior of SRC columns. A straightforward approach was then proposed by establish...
متن کاملA comparative Analysis of Experimental and Numerical Investigations of Composite Tubes under Axial and Lateral Loading
Quasi-static tests are performed in order to determine the crash behavior of composite tubes. The specimens are made from woven fiber carbon/epoxy. The crash experiments show that the tubes crushed in a progressive manner from one end to the other of the tubes while delamination was taking place between the layers. In the simulation works described in this paper the ANSYS explicit finite elemen...
متن کاملExperimental investigations on the softening and ratcheting behaviors of steel cylindrical shell under cyclic axial loading
In this research, softening and ratcheting behaviors of Ck20 alloy steel cylindrical shells were studied under displacement-control and force-control cyclic axial loading and the behavior of hysteresis curves of specimens was also investigated. Experimental tests were performed by a servo-hydraulic INSTRON 8802 machine. The mechanical properties of specimens were determined according to ASTM E8...
متن کاملOptimization of Additively Manufactured Multi-material Lattice Structures Using Generalized Optimality Criteria
Recent progress in additive manufacturing allows for printing customized products with multiple materials and complex geometries. Effectively designing such complex products for optimal performance within the confines of additive manufacturing constraints is challenging, due to the large number of variables in the search space and uncertainties about how the manufacturing processes affect fabri...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Material Design & Processing Communications
سال: 2020
ISSN: 2577-6576,2577-6576
DOI: 10.1002/mdp2.164