Numerical and Experimental Investigation on Die and Blank Holder Shape in Deep Drawing Process
نویسندگان
چکیده
منابع مشابه
Numerical and Experimental Research of Deep Drawing Process
There are mainly two methods of deep drawing analysis; experimental and analytical/numerical. Experimental analysis can be useful in analyzing the process to determine the process parameters that produce a defect free product, and the analytical/numerical modeling can be used to model and analyze the process through all stages of deformation. This approach is less time consuming and more econom...
متن کاملExperimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy
Aluminum alloys have a high strength-to-weight ratio and proper anti-corrosion properties that are used in the automotive, shipbuilding and aerospace industries. The major problem with forming aluminum sheets is the low formability of aluminum sheets at room temperature. Therefore, in the present study, warm deep drawing (WDD) of AA5052-O aluminum alloy sheets with a thickness of 1mm was invest...
متن کاملNumerical and Experimental Investigation of Deep Drawing Process in Square Section of Single-Layer and Two-Layer Sheet
Deep drawing of two-layer sheet is a suitable way to achieve product with a desired shape and desired properties in sheet metal forming technology. Control of deep drawing parameter such as thinning is the most important challenge in this process. The most difficult part of this challenge is differences in material properties and geometry of each layer. In this paper, numerical approach has bee...
متن کاملNumerical and Experimental Investigation of the Effect of Open-Die Hot Deep Drawing Process Parameters on the Formability of Commercially Pure Titanium
In the present study, the finite element analysis of the hot deep drawing process of commercially pure (CP) titanium has been performed without the blank holder in order to investigate the influence of temperature (T), die radius (Rd) and blank diameter (D) on the maximum punch force (Fp) and minimum thickness of the blank (t). Tensile tests were first conducted to extract...
متن کاملA fuzzy logic model to determine the effects of die/blank holder angle and punch radius on drawing ratio in angular deep drawing dies
Deep drawing process is one of the widely used methods in sheet-metal forming. With the deep drawing method, products of various geometrical shapes such as saucepans, tubes, perfume and soft drink cans can be obtained easily. Therefore, the optimization of the deep drawing process is very important for the industry. In conventional deep drawing method, no angle is given to the surfaces of die a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Sciences
سال: 2008
ISSN: 1812-5654
DOI: 10.3923/jas.2008.2153.2157