Numerical and experimental analysis of a natural ventilation windcatcher with passive heat recovery for mild-cold climates

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical analysis of natural convection in shed roofs with eave of buildings for cold climates

A numerical study has been carried out on partially heated triangular enclosures with eave. The eave and inclined wall has a cold temperature. The laminar, two-dimensional, steady governing equations of natural convection are solved in the streamfunction-vorticity form using a finite difference technique. Streamline, isotherm andNusselt number are presented for different parameters such as aspe...

متن کامل

Experimental and numerical study of natural ventilation in four-sided wind tower traps

In the past, wind towers were applied as the main architectural part of building construction in the desert areas of Iran. These almost high structures were used as cooling load suppliers at residential buildings. In the present study, the effect of symmetric four-sided wind tower in flow induction to the bottom space has been analysed by using a wind tunnel and numerical simulations. In the nu...

متن کامل

A Numerical Modeling for Natural Convection Heat Transfer in Porous Media With Generated Internal Heat Sources

In this paper a numerical method is used to study the unsteady state natural convection heat transfer within a confined porous media with uniform internal heat generation. The governing equations based on the Darcy model and Bossiness approximations are solved, using the finite difference Alternating Direction Implicit (ADI) method. The developed program was used to simulate natural convection ...

متن کامل

Experimental and Numerical Analysis of Flow and Heat Transfer in a Gas-Liquid Thermosyphon Heat Exchanger in a Pilot Plant

A numerical and experimental investigation of flow and heat transfer in a gas- liquid Thermosyphon Heat Exchanger "THE" with built in heat pipes and aluminum plate fins for moderate Reynolds numbers has been carried out. It's module is composed of 6 rows and 15 columns copper pipes with aluminum plate fins with dimensions of 130cm height, 47cm width and  20cm depth. The tubes have been fill...

متن کامل

Hybrid Ventilation with Innovative Heat Recovery—A System Analysis

One of the most important factors when low energy houses are built is to have good heat recovery on the ventilation system. However, standard ventilation units use a considerable amount of electricity. This article discusses the consequences on a system level of using hybrid ventilation with heat recovery. The simulation program TRNSYS was used in order to investigate a ventilation system with ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Energy Procedia

سال: 2019

ISSN: 1876-6102

DOI: 10.1016/j.egypro.2019.01.1011