Numerical analysis on performances of shell side in segmental baffles, helical baffles and novel clamping anti-vibration baffles with square twisted tubes shell and tube heat exchangers
نویسندگان
چکیده
منابع مشابه
CFD Analysis of Combined Serial Two Shell Pass Shell and Tube Heat Exchanger with Continuous Helical Baffles
In the present era where energy demands are growing everyday it has become very important to capture every available energy from the hot source and utilize it for the process with minimum wastage. With this view, the combined serial two shell pass shell and tube heat exchanger (CSTSP) concept had been put forward and simulated using Fluent. Though the novel model of the heat exchanger has a hig...
متن کاملInvestigating Tubes Material Selection on Thermal Stress in Shell Side Inlet Zone of a Vertical Shell and Tube Heat Exchanger
In this study, the effect of the tube material on the thermal stress generated in a vertical shell and tube heat exchanger is investigated. Shell and tube heat exchangers are the most common heat exchangers used in industries. One of the most common failures in these exchangers in the industry is the tube failure at the junction of the tube to tubesheet. When the shell side and the tube side fl...
متن کاملHydraulic Network Modeling to Analyze Stream Flow Effectiveness on Heat Transfer Performance of Shell and Tube Heat Exchangers
In this article, stream flow effectivness is based on hydraulic network studied in the shell-side of a shell and tube heat exchange as a case study. For an appropriate heat exchangers rating design to meet a specified duty, it's better to consider each stream flow separately. Using the hydraulic network principals, a set of the correlations for calculating different stream flow rates in the cro...
متن کاملAnalysis of Fluid Dynamics and Heat Transfer in a Rectangular Duct with Staggered Baffles
This computational fluid dynamic analysis attempts to simulate the incompressible steady fluid flow and heat transfer in a solar air channel with wall-mounted baffles. Two ꞌSꞌ-shaped baffles, having different orientations, i.e., ꞌSꞌ-upstream and ꞌSꞌ-downstream, were inserted into the channel and fixed to the top and bottom walls of the channel in a periodically staggered manner to develop vorti...
متن کاملTwisted Tube Heat Exchanger Technology
Over 85% of all new heat exchanger applications in oil refining, chemical, petro-chemical, and power generation are accommodated through the use of conventional shell and tube type heat exchangers. The fundamental basis for this statistic is shell and tube technology is a cost effective, proven solution for a wide variety of heat transfer requirements. However, there are limitations associated ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2019
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2019.01.553