Numerical Analysis of Reynolds Stresses for Developing Turbulent Flow in Square-Sectioned Bend.
نویسندگان
چکیده
منابع مشابه
Turbulent Boundary-Layer Development Around a Square- Sectioned U-Bend: Measurements and Computation
A computational and experimental study is reported of turbulent flow around a square-sectioned U-bend with a mean bend radius equal to 3.375 times the hydraulic diameter (DH): the duct Reynolds number is 58,000. The bend geometry is the same as that for which Chang et al. (1983) have reported extensive LDA data except that in the latter experiment the bend was preceded by some thirty hydraulic ...
متن کاملNumerical Investigation of Turbulent Mass Transfer in a 90° Bend
This paper presents a numerical study of local mass transfer coefficients in a 90° bend using the RNG version of k–e model to include the influence of curvature on the turbulent transport. Simulations were performed for flow through a 90°, 3-D bend for Reynolds numbers of 13500, 90000, and 390000, Schmidt numbers of 2.53 and 700 and curvature ratios of 1.5, 2, and 2.5. The differences betwe...
متن کاملReynolds Stresses and Hemolysis in Turbulent Flow Examined by Threshold Analysis
Use of laminar flow-derived power law models to predict hemolysis with turbulence remains problematical. Flows in a Couette viscometer and a capillary tube have been simulated to investigate various combinations of Reynolds and/or viscous stresses power law models for hemolysis prediction. A finite volume-based computational method provided Reynolds and viscous stresses so that the effects of a...
متن کاملnumerical investigation of turbulent mass transfer in a 90° bend
this paper presents a numerical study of local mass transfer coefficients in a 90° bend using the rng version of k–e model to include the influence of curvature on the turbulent transport. simulations were performed for flow through a 90°, 3-d bend for reynolds numbers of 13500, 90000, and 390000, schmidt numbers of 2.53 and 700 and curvature ratios of 1.5, 2, and 2.5. the differences between t...
متن کاملStudy on Pressure Drop Characteristics of Single Phase Turbulent Flow in Pipe Bend for High Reynolds Number
Pressure drop characteristics of turbulent flow through 90 degree pipe bends are numerically investigated by computational fluid dynamic simulation using k-ε RNG turbulence model with standard wall function. After the validation of present model against existing experimental results, a detailed study has been performed to investigate the pressure distribution and pressure drop characteristics o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 1995
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.61.1301