Numerical Analysis of Immersion Nozzle Outlet Flow Pattern through Using Swirling Flow in Continuous Casting

Numerical Study of Steady Turbulent Flow through Bifurcated Nozzles in Continuous Casting

Bifurcated nozzles are used in continuous casting of molten steel, where they influence the quality of the cast steel slabs. The present study performs two-dimensional (2-D) and three-dimensional (3D) simulations of steady turbulent (K-e) flow in bifurcated nozzles, using a finite-element (FIDAP) model, which has been verified previously with water model experiments. The effects of nozzle desig...

Numerical Investigation of Supersonic Nozzle Flow Separation

S EPARATION of supersonic flow in a convergent–divergent nozzle is a fundamental fluid phenomenon that affects a large variety of applications, from fuel systems to aircraft engine nozzles. When a supersonic nozzle is operated at pressure ratioswell below its design point, a shock forms inside the nozzle andflowdownstreamof the shock separates from the nozzle walls. Even though flow separation ...

Melt Flow Characterization in Continuous Casting Tundishes

Melt flow in continuous casting tundishes is normal[y characterized by a combined model. The model is used to analyze the residence time disttibution of fluid in a tundish, In this model, the fluid volume in tundish is considered to be consisting of the plug flow, well-mixed flow, and dead volumes. Although this model was proposed over 20 years ago, most researchers have either used it incorrec...

Numerical Simulation of a Confined Swirling Flow in a Model Gas Turbine Combustor

Control of Nozzle Flow Using Microjets at Supersonic Mach Regime

This article reports the active control of base flows using the experimental procedure. Active control of base pressure helps in reducing the base drag in aerodynamic devices having suddenly expanded flows. Active control in the form of microjets having 0.5 mm radius placed at forty-five degrees apart is employed to control the base pressure. The Mach numbers of the present analysis are 1.7, 2....