Nucleation-controlled freeze casting of preceramic polymers for uniaxial pores in Si-based ceramics
نویسندگان
چکیده
منابع مشابه
Room-Temperature Freeze Casting for Ceramics with Nonaqueous Sublimable Vehicles in the Naphthalene–Camphor Eutectic System
Freeze casting for Al2O3 was accomplished at room temperature with nonaqueous sublimable vehicles in the naphthalene– camphor eutectic system with a eutectic temperature of 31°C. A fully dense sintered body (>99.5% of theoretical density (T.D.)) was obtained with a eutectic composition vehicle, whereas at most 90% T.D. was obtained with an off-eutectic (i.e., hypoor hypereutectic) composition v...
متن کاملAdvanced Ceramics from Preceramic Polymers Modified at the Nano-Scale: A Review
Preceramic polymers, i.e., polymers that are converted into ceramics upon heat treatment, have been successfully used for almost 40 years to give advanced ceramics, especially belonging to the ternary SiCO and SiCN systems or to the quaternary SiBCN system. One of their main advantages is the possibility of combining the shaping and synthesis of ceramics: components can be shaped at the precurs...
متن کاملReverse freeze casting: a new method for fabricating highly porous titanium scaffolds with aligned large pores.
Highly porous titanium with aligned large pores up to 500 μm in size, which is suitable for scaffold applications, was successfully fabricated using the reverse freeze casting method. In this process we have newly developed, the Ti powders migrated spontaneously along the pre-aligned camphene boundaries at a temperature of 45.5°C and formed a titanium-camphene mixture with an aligned structure;...
متن کاملReproducibility of ZrO2-based freeze casting for biomaterials.
The processing technique of freeze casting has been intensely researched for its potential to create porous scaffold and infiltrated composite materials for biomedical implants and structural materials. However, in order for this technique to be employed medically or commercially, it must be able to reliably produce materials in great quantities with similar microstructures and properties. Here...
متن کاملCeramic Nanocomposites from Tailor-Made Preceramic Polymers
The present Review addresses current developments related to polymer-derived ceramic nanocomposites (PDC-NCs). Different classes of preceramic polymers are briefly introduced and their conversion into ceramic materials with adjustable phase compositions and microstructures is presented. Emphasis is set on discussing the intimate relationship between the chemistry and structural architecture of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scripta Materialia
سال: 2017
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2016.10.038