Nucleating and Plasticization Effects in Drawn Poly(Lactic Acid) Fiber during Accelerated Weathering Degradation
نویسندگان
چکیده
منابع مشابه
The Degradation of Polylactic Acid Aiber
Polylactic acid (PLA) fiber, also known as corn fiber, is made of corn and other grains through fermentation, polymerization and spinning. Thus it is biodegradable and environmentally friendly. Three kinds of buffer solutions with PH values of 4, 7.2 and 11 were made for the investigation of the degradation properties of PLA. The experimental results showed that the degradation of polylactic ac...
متن کاملSunlight , UV , & Accelerated Weathering
Sunlight is an important cause of damage to plastics, textiles, paints, and other organic materials. Short wavelength ultraviolet light has long been recognized as being responsible for most of this damage2. Spectroradiometric measurements were made to quantify the wide variations in UV content of sunlight under the following conditions: direct summer sunlight, winter sunlight, sunlight filtere...
متن کاملPolylactic acid (PLA)
This website provides an excellent overview of PLA as a polymer, its properties, and manufacture. This web article describes the production of lactic acid from biomass by microbial fermentation coupled to a poly-merization process to make PLA. The article is a bit dated and its industrial projections are now seen to be a bit over-optimistic. NatureWorks is the company that started large-scale p...
متن کاملMonitoring Wood Degradation during Weathering by Cellulose Crystallinity
The degree of crystallinity of cellulose was used for assessing the degradation level of coated and uncoated samples of pine wood after weathering. X-ray diffraction (XRD) and Fourier Transform Infrared (FT-IR) spectroscopy measured the changes in the surface crystallinity of cellulose resulting from weathering, both natural and artificial. Both techniques revealed an increase in the crystallin...
متن کاملEffects of Biomass in Polyethylene or Polylactic Acid Composites
There is need for bioplastics to replace some of the total petroleum plastics used in the world, and help alleviate environmental pollution. Compounding bioplastics with Polyethylene (PE) or Polylactic acid (PLA) containing a dairy-based bioplastic resulted in composites with good mechanical properties. In this study, mass ratios of a dairy-protein-based material (DBP) ranging from 0, 5, 10 and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers
سال: 2018
ISSN: 2073-4360
DOI: 10.3390/polym10040365