Nozzle flow velocity measurements using the laser velocimeter.
نویسندگان
چکیده
منابع مشابه
Laser Doppler velocimeter for velocity and length measurements of moving surfaces.
An industrial laser Doppler velocimeter has been developed for accurately measuring the velocity and length of moving surfaces. The instrument's advanced optical and electronic design provides a large depth of field, high SNR, and large dynamic range making it very suitable to industrial process control applications.
متن کاملA Sub-Miniature Laser-Doppler Velocimeter for High Speed Flow Measurements
A new laser-Doppler velocimeter (LDV) for high speed flow measurements (three-dimensional flows with speeds greater than 610 m/s) is being developed based in-part upon an existing low speed instrument capable of high resolution, near surface velocity vector measurements. The key technology for the instrument is a sub-miniature laser-Doppler velocimeter (SMLDV); a similar low-speed version of wh...
متن کاملSpatially resolved flow velocity measurements using laser-induced fluorescence from a pulsed laser.
We describe how spatially resolved velocity measurements can be acquired using a pulse-amplified single-mode cw laser with a potential of single-shot measurements. The laser beam was tuned to the point of maximum slope of a Doppler-broadened absorption profile of I(2), which was seeded into the flow. The beam was then split into two components and sent counterpropagating through the measurement...
متن کاملCalibration of the CERTIFIER Air Velocity Calibrator Using a Laser Doppler Velocimeter (LDV)
Introduction Traditionally a Pitot-static tube connected to a pressure transducer is used to make air velocity measurement. Lately, velocity transducers based on the principle of convective heat transfer have become popular. Both types of transducers need occasional calibrations. Also, several regulatory agencies require that the calibration of velocity transducers used in certain applications ...
متن کاملAIAA 2002-2917 Nonintrusive Temperature and Velocity Measurements in a Hypersonic Nozzle Flow
Distributions of nitric oxide vibrational temperature, rotational temperature and velocity have been measured in the hypersonic freestream at the exit of a conical nozzle , using planar laser-induced fluorescence. Particular attention has been devoted to reducing the major sources of systematic error that can affect fluorescence temperature measurements, including beam attenuation, transition s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 1989
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.55.1802