Novel Micro-Patterning of Aluminum Surface by Anodizing and AFM-Processing
نویسندگان
چکیده
منابع مشابه
Fast Anodizing of Aluminum Piston Heads
Hard anodizing of aluminum piston heads for internal combustion engines Is usually performed by immersion, with a time ranging from 40 to 50 minutes. This paper wii i present a new process, based on specially adapted hydrodynamics of the electrolyte, applying electrolysis parameter values outside the usual range and which greatly reduce the treatment time. In addition to applications to other c...
متن کاملAnalysis of Surface Roughness and Micro-hardness in Roller Burnishing of Aluminum Alloy 6061
Burnishing is a chip-less finishing process, in which a hard roller or ball presses the surface layer of part to perform plastic deformation in the surface layer and produce improved finish, enhanced hardness and compressive residual stresses on the surface of special materials such as Aluminum and Brass. In the following research, the effect of input parameters such as feed rate, cutting speed...
متن کاملImproved Technology for Hard Anodizing Dissolution of Aluminum Alloy Part
This paper deeply analyzes the main factors of the dissolved problems arising in the process of aluminum alloy hard anodizing, combined with the specific problems occurring in production practice, introduces in detail the method and thought to analyze and investigate the causes of dissolving, and puts forward targeted improvement technology. This paper is practically instructive and significant...
متن کاملA Low Cost Method for Manufacturing of Aluminum / Alumina Composite by Anodizing and CRB Process :
A Low Cost Method for Manufacturing of Aluminum/Alumina Composite by Anodizing and CRB Process: Roohollah Jamaati1; Mohammad Reza Toroghinejad1; E. Zahrani1; 1Isfahan University of Technology In this work, Al/Al2O3 composite strips are manufactured by a low cost method consist cold roll bonding (CRB) process of anodized aluminum strips. This technique has the flexibility to control the volume f...
متن کاملConductive-AFM Patterning of Organic Semiconductors.
Using a conductive atomic force microscope (c-AFM) redox-writing technique, it is shown that it is possible to locally, and reversibly, pattern conducting, and nonconducting features on the surface of a low molecular weight aniline-based organic (semi)-conductor thin film using a commercial c-AFM. It is shown that application of a voltage between the tip and sample causes localized redox reacti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Zairyo-to-Kankyo
سال: 2003
ISSN: 0917-0480,1881-9664
DOI: 10.3323/jcorr1991.52.12