Novel method of polymer/low-melting-point metal alloy/light metal fiber composite fabrication
نویسندگان
چکیده
منابع مشابه
The fabrication of periodic metal nanodot arrays through pulsed laser melting induced fragmentation of metal nanogratings.
We propose and demonstrate a new method for fabricating periodic arrays of metal nanodots over a large area. In this method, metal nanogratings were first patterned on a substrate by nanoimprint lithography and lift-off, and were then melted using a single excimer laser pulse. We found that the laser melting broke the metal nanogratings into periodic nanodots. Furthermore, we demonstrated the c...
متن کاملModeling and Fabrication of Ionic Polymer-metal Composite (ipmc) Sensors
MODELING AND FABRICATION OF IONIC POLYMER-METAL COMPOSITE (IPMC) SENSORS By Hong Lei Ionic polymer-metal composites (IPMCs) are an important class of electroactive polymers (EAPs) with built-in actuation and sensing capabilities. They have received tremendous interest for their potential in various sensor applications. In this dissertation, a physics-based dynamic model is proposed for cantilev...
متن کاملFreeform fabrication of ionomeric polymer-metal composite actuators
Purpose – To seek to produce low-voltage, soft mechanical actuators entirely via freeform fabrication as part of a larger effort to freeform fabricate complete electromechanical devices with lifelike and/or biocompatible geometry and function. Design/methodology/approach – The authors selected ionomeric polymer-metal composite (IPMC) actuators from the literature and the authors’ own preliminar...
متن کاملA novel fabrication of ionic polymer–metal composite membrane actuator capable of 3-dimensional kinematic motions
Ionic polymer–metal composites (IPMCs) are one type of wet electroactive polymers that show promising actuating properties in many bio-inspiring underwater robotic applications. In these applications, 3-dimensional kinematic motions are desirable to generate high efficient thrust and maneuverability. However, traditional IPMCs are limited in being only able to generate bending motion. In this p...
متن کاملVibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm
The paper illustrates the application of a combined adaptive particle swarm optimization (A-PSO) algorithm and the finite strip method (FSM) to the lay-up optimization of symmetrically fiber-metal laminated (FML) composite shallow shell panels for maximizing the fundamental frequency. To improve the speed of the optimization process, adaptive inertia weight was used in the particle swarm optimiz...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Express Polymer Letters
سال: 2016
ISSN: 1788-618X
DOI: 10.3144/expresspolymlett.2016.50