Novel Method for Deposition of Gas-Tight SiC Coatings
نویسندگان
چکیده
A new high-temperature method for the deposition of gas-tight silicon carbide protective coatings with low gas permeability has been developed. The free carbon atoms form during pyrolysis hydrocarbon molecules. In turn, reacts molten contained in subsurface substrate layers and/or vapor. source vapor serves heated zone a reactor furnace. Such effectively protect SiC-C-Si and SiC-C-MoSi2 ceramics, carbon–carbon composite materials, structural graphite, refractory metals alloys from oxidation. conducted tests show high thermal oxidation shock stability deposited coatings, as well their good adhesion to substrates.
منابع مشابه
A Novel Method for Mitigation of Asphaltene Deposition in the Wellstring
Asphaltene precipitation and deposition is a serious problem in many Iranian fields. The deposited asphaltene results in partial or total blockage of the wellbore and wellstring reducing or completely seizing oil production. This paper studies the asphaltene problem and mitigation methods in wellstring systematically. It presents new approach based on the combination of thermodynam...
متن کاملDeposition of Nano-Crystalline Fluor-hydroxyapatite Coatings on Titanium Substrates via Sol-Gel Method
In this investigation, fluor-hydroxyapatite (FHA) film was deposited on a titanium substrate by sol-gel method. Triethyl phosphite, ammonium fluoride and calcium nitrate in ethanol solutions were used respectively as P, F and Ca precursors. Typical apatite structures were obtained for all coatings after dipping and subsequent heat treatment at 550, 700 and 800 ºC, the coating layers were ...
متن کاملSiC coatings grown by liquid injection chemical vapor deposition using single source metal-organic precursors
متن کامل
Preparation of Ultra Dispersive Glasses for Designing Novel Coatings
In order to attain glasses with ultra dispersions properties, different heavy metal oxides were used. The desired glasses were obtained from the addition of high amounts of PbO and Bi2O3 to B2O3 based glasses. Refractive index measurements were carried out accurately at different wavelengths by the minimum angle of deviation in prisms method employing a spectrometer. Results indicated that, as ...
متن کاملDEVELOPMENT OF CVD MULLITE COATINGS FOR SiC FIBERS
1.0 Introduction 2.0 Experimental details 2.1 CVD process 2.2 Oxidation Testing 2.3 Cyclic Oxidation Testing 2.4 Corrosion Testing 2.5 Tensile Testing 3.0 Results and discussion 3.1 3.2 3.3 3.4 3.5 3.6 Effect of system parameters 3.1.1 System pressure 3.1.2 Input gas velocity 3.1.3 A1/Si molar ratio Structure of mullite coating Oxidation Testing Cyclic Oxidation Hot Corrosion Tensile Strength 4...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2023
ISSN: ['2079-6412']
DOI: https://doi.org/10.3390/coatings13020354