Novel low-temperature sintering ceramic substrate based on indialite/cordierite glass ceramics
نویسندگان
چکیده
منابع مشابه
Waste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation
Waste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation I. Ponsot, R. Detsch, A. R. Boccaccini & E. Bernardo To cite this article: I. Ponsot, R. Detsch, A. R. Boccaccini & E. Bernardo (2015) Waste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation, Advances in Applied Ceramics, 114:sup1, S17-S25, DOI: 10.1179...
متن کاملLow-temperature sintering of MnO2-doped PZT–PZN Piezoelectric ceramics
The effect of MnO2 addition on the microstructural evolution and piezoelectric properties of low temperature sinterable PZT–PZN ceramics was investigated. When a small amount of MnO2 (≤0.5 wt% ) was added, the Mn ions were homogeneously dissolved in the PZT– PZN ceramics, leading to full densification at a temperature as low as 930 °C. However, the further addition of MnO2 hindered the densific...
متن کاملPreparation and Analysis of MBS based Glass-Ceramic for LTCC Applications
In this paper the MBS (Magnesium borosilicate) based glass-ceramic have been prepared and characterised to find its suitability in Low temperature cofired ceramics (LTCC) technology. The glass-ceramics were prepared by using conventional solid state route. The experimental study was conducted on the MBS glass-ceramic containing MAS (Magnesium Alumino-Silicate) based glass-ceramic as an additive...
متن کاملStructural and Dielectric Properties of Glass – Ceramic Substrate with Varied Sintering Temperatures
The main requirements of microwave circuit technology for wireless applications are a com‐ bination of high performance circuit, high integration density and frequency stability with a cost effective price [1-2]. Ceramic technology is particularly well suited to these require‐ ments due to the superior performance of their electrical, electromechanical, dielectric and thermal properties in orde...
متن کاملLow-dose laser sintering of Cu nanoparticles on the ceramic substrate during ink-jet interconnection
The deposition of nano-size copper particles was carried out by means of ink-jet printing on the ceramic substrate (silicon and faience) using Nd +3 :YAG laser. Glycerin and aqueous based nano copper inks were prepared and were inkjetted in this study. The sintered copper film had a grainy structure with neck-like junctions. The microstructure and soldering properties were examined using XRD, S...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Japanese Journal of Applied Physics
سال: 2017
ISSN: 0021-4922,1347-4065
DOI: 10.7567/jjap.56.10pe01