Novel Kinematic Calibration Method of Parallel Mechanisms Using the Equivalent Kinematic Chains
نویسندگان
چکیده
منابع مشابه
Kinematic Calibration for Redundantly Actuated Parallel Mechanisms
We present a new kinematic calibration algorithm for redundantly actuated parallel mechanisms, and illustrate the algorithm with a case study of a planar seven-element 2-degree-of-freedom (DOF) mechanism with three actuators. To calibrate a nonredundantly actuated parallel mechanism, one can find actual kinematic parameters by means of geometrical constraint of the mechanism’s kinematic structu...
متن کاملKinematic Calibration of the Orthoglide-Type Mechanisms
The paper proposes a novel calibration approach for the Orthoglide-type mechanisms based on observations of the manipulator leg parallelism during motions between the prespecified test postures. It employs a low-cost measuring system composed of standard comparator indicators attached to the universal magnetic stands. They are sequentially used for measuring the deviation of the relevant leg lo...
متن کاملKinematic Calibration of a Cartesian Parallel Manipulator
Abstract: In this paper, a prototype Cartesian Parallel Manipulator (CPM) is demonstrated, in which a moving platform is connected to a fixed frame by three PRRR limbs. Due to the orthogonal arrangement of the three prismatic joints, it behaves like a conventional X-Y-Z Cartesian robot. However, because all the linear actuators are mounted at the fixed frame, the manipulator may be suitable for...
متن کاملKinematic calibration of orthoglide-type mechanisms
The paper proposes a novel calibration approach for the Orthoglide-type mechanisms based on observations of the manipulator leg parallelism during motions between the prespecified test postures. It employs a low-cost measuring system composed of standard comparator indicators attached to the universal magnetic stands. They are sequentially used for measuring the deviation of the relevant leg lo...
متن کاملKinematic calibration of a parallel robot using coordinate measuring machine
In the applications of parallel robots, kinematic calibration is required to eliminate the errors resulting from the manufacturing and assembly. In this paper, a new method for calibrating a parallel robot is proposed. An error model for kinematic calibration is constructed using differential geometry method. All leg length information and pose error are obtained based on measurement results co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Jixie gongcheng xuebao
سال: 2022
ISSN: ['0577-6686']
DOI: https://doi.org/10.3901/jme.2022.14.071