Nonlinearity of Uniaxial Compressive Response in Atmospheric Plasma Sprayed Free-Standing CoNiCrAlY Coatings

Bone Tissue Response to Plasma Sprayed Hydroxyapatite Coatings: An In Vivo Study on Rabbit Femoral Condyles

     In this study, hydroxyapatite was coated on titanium substrates by plasma spraying process. A well-known porous and lamellar microstructure was found in the lateral a...

bone tissue response to plasma sprayed hydroxyapatite coatings: an in vivo study on rabbit femoral condyles

in this study, hydroxyapatite was coated on titanium substrates by plasma spraying process. a well-known porous and lamellar microstructure was found in the lateral and outer surface of coating. the phase composition was studied by xrd and the morphological and the microstructural aspects were investigated by scanning electron and optical microscopy. the hardness of coatings and substrates was ...

Sintering of Fine Particles in Suspension Plasma Sprayed Coatings

Suspension plasma spraying is a process that enables the production of finely grained nanometric or submicrometric coatings. The suspensions are formulated with the use of fine powder particles in water or alcohol with some additives. Subsequently, the suspension is injected into plasma jet and the liquid additives evaporate. The remaining fine solids are molten and subsequently agglomerate or ...

Dynamic Uniaxial Strain Model for Plasma-sprayed Material

Analytically Modeling of In Vitro Calcium Dissolution of Plasma- Sprayed Hydroxyapatite Coatings

      The in vitro dissolution of plasma-sprayed hydroxyapatite (PHA) coatings with different characteristics, produced by various spraying conditions, in a Tris-buffered solution at pH 7.4 was experimentally studied through the measurement of calcium ions release with Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), and then modeled. Three coating characteristics, th...