NONLINEAR STRESS ANALYSIS FOR CFRP-SHEET-BONDED STEEL PLATES UNDER UNIAXIAL TENSILE LOADING
نویسندگان
چکیده
منابع مشابه
Lattice strain evolution during uniaxial tensile loading of stainless steel
Applied and residual lattice strains were determined by neutron diffraction during a tensile test of a weakly textured austenitic stainless steel and were compared to the predictions of a self-consistent polycrystal deformation model. Parallel to the tensile axis the model predictions are generally within the resolution of the diffraction measurements, but perpendicular to the tensile axis disc...
متن کاملBond–Slip Relationship for CFRP Sheets Externally Bonded to Concrete under Cyclic Loading
The objective of this paper was to explore the bond-slip relationship between carbon fiber-reinforced polymer (CFRP) sheets and concrete under cyclic loading through experimental and analytical approaches. Modified beam tests were performed in order to gain insight into the bond-slip relationship under static and cyclic loading. The test variables are the CFRP-to-concrete width ratio, and the b...
متن کاملWrinkling Analysis of A Kapton Square Membrane under Tensile Loading
A buckling solution and a non-linear post buckling solution were employed for the wrinkling analysis of a tensioned Kapton square membrane. The buckling solution with significantly reduced bending stiffness creates localized buckling modes accounting for the wrinkle formation in the membrane. The non-linear post buckling solution with an updated Lagrangian scheme describes the detailed wrinkle ...
متن کاملNonlinear Uniaxial Material Model for Reinforcing Steel Bars
Recent advances in nonlinear analysis of reinforced concrete structures have been based primarily on fiber-based discretization of the member cross section at locations of expected inelastic action. However, the accuracy of a fiber-section model is almost entirely dependent on the ability of constitutive material models to represent the overall inelastic behavior of the member. The postyield re...
متن کاملStepped-end Design for Carbon Fiber -reinforced Plastic (cfrp) Bonded onto a Steel Plate under Uni-axial Load
In the application of multiple Carbon Fiber-Reinforced Plastic (CFRP) plates onto a structural steel member, stepping of the CFRP plate ends is often adopted to prevent debonding. This approach requires the nonuniform extension of CFRP plate lengths. In this study, to shorten the length of CFRP plates, a nonuniform overlapping arrangement of several CFRP plate ends was proposed and the theoreti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of JSCE
سال: 2020
ISSN: 2187-5103
DOI: 10.2208/journalofjsce.8.1_127