Nonlinear shear behavior and interlaminar shear strength of unidirectional polymer matrix composites: A numerical study
نویسندگان
چکیده
منابع مشابه
Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
1.1 This test method describes the determination of the opening Mode I interlaminar fracture toughness, GIc, of continuous fiber-reinforced composite materials using the double cantilever beam (DCB) specimen (Fig. 1). 1.2 This test method is limited to use with composites consisting of unidirectional carbon fiber and glass fiber tape laminates with brittle and tough single-phase polymer matrice...
متن کاملInfluence of titanium carbide on the interlaminar shear strength of carbon fibre laminate composites
The potential use of carbon fibre laminate composites is limited by the weak out-ofplane properties, especially delamination resistance. The effect of incorporating titanium carbide to the mesophase pitch matrix precursor of carbon fibre laminate composites on interlaminar shear strength is studied both on carbonised and graphitised composites. The presence of titanium carbide modifies the opti...
متن کاملNon-Linear Behavior and Shear Strength of Diagonally Stiffened Steel Plate Shear Walls
In this study, non-linear behavior of diagonally stiffened steel plate shear walls as a seismic resisting system has been investigated, and theoretical formulas for estimating shear strength capacity of the system have been proposed. Several validated analytical finite element models of steel shear walls with various stiffener dimensions are generated to verify and compare the analytical and th...
متن کاملShear-lag model for failure simulations of unidirectional ®ber composites including matrix stiness
In this paper, we develop a shear-lag model and an in ̄uence superposition technique to quickly compute the stresses and displacements in 2D unidirectional ®ber composites in response to multiple ®ber and matrix breaks. Unlike previous techniques, both the ®ber and matrix are able to sustain axial load, and the governing shear-lag equations are derived based on the principle of virtual work and ...
متن کاملHigh temperature shear strength of T650-35 / HFPE-II-52 polyimide matrix unidirectional composite
The shear strength of a 4-ply unidirectional composite laminate consisting of carbon fibers (T650-35) and a polyimide matrix (HFPE-II-52) was measured over a temperature range of 25 to 315C. The tests were performed using a Iosipescu test sample, modified to provide a more uniform shear stress distribution across the gauge section and loaded with an Arcan type test fixture. The test specimen de...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Solids and Structures
سال: 2014
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2013.12.014