Nonlinear seismic performance of a regular building using base isolation method
نویسندگان
چکیده
Researches in past reviewed for base isolation analysis using response spectrum it is found that the design ancient time are not sure and safe due to lake of technology lesser software availabilities. Some countries applied these days building constructed with performed better at practical ground. The isolated terms amplitude cost can also be optimized. Many researchers studied this subject they concluded must critical seismic zones isolators used save lives properties. It seen Indian construction practices lacking apply use design. suggested end motivated study research constrains conditions.
منابع مشابه
Seismic Response Control Using Base Isolation Strategy
Earthquakes are one of the natural hazards that occur due to sudden violent movement of earth’s surface which releases energy and has destructive power in many parts of the world. The development of recent technologies for the control of seismic hazards catches the attention of structural engineers to make the structures seismically resistant. The seismic base isolation technique is a passive p...
متن کاملSeismic Performance of Low-Ductility Precast Wall Structure with Base Isolation
It is impractical and uneconomic to design a structure that remains elastic throughout severe ground motions. The main design philosophy is that minor structural damages are acceptable as long as the structure does not collapse. Hence, seismic base isolation of structures provides a better alternative in constructing seismic resistant structures. A fixed-base structure designed in accordance to...
متن کاملSeismic Response Reduction of Structures using Smart Base Isolation System
In this study, control performance of a smart base isolation system consisting of a friction pendulum system (FPS) and a magnetorheological (MR) damper has been investigated. A fuzzy logic controller (FLC) is used to modulate the MR damper so as to minimize structural acceleration while maintaining acceptable base displacement levels. To this end, a multi-objective optimization scheme is used t...
متن کاملNonlinear Dynamic Analysis of a Structure with a Friction-Based Seismic Base Isolation System
The seismic activity in some parts of the world requires that the performance of structures under this type of excitation, is carefully evaluated. In regions where seismicity is insignificant, the conventional design approach aims at the design of structural members in such a way that all static and dynamic loads (such as wind load) are withstood elastically. However, in cases where seismic exc...
متن کاملAN EFFICIENT METHOD FOR OPTIMUM PERFORMANCE-BASED SEISMIC DESIGN OF FUSED BUILDING STRUCTURES
A dual structural fused system consists of replaceable ductile elements (fuses) that sustain major seismic damage and leave the primary structure (PS) virtually undamaged. The seismic performance of a fused structural system is determined by the combined behavior of the individual PS and fuse components. In order to design a feasible and economic structural fuse concept, we need a procedure to ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2021
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202130901171