Nonlinear FEM Analysis of RC Beam-Column Joint Strengthened by Cast In-Situ Joint Expansion
نویسندگان
چکیده
منابع مشابه
Fem Analysis of Truss Hollow Section Joint
Truss structures are widely used in construction of large-scale buildings. Design of steel structures is standardised in detail through set of European standards called EUROCODE. One of these standards, ENV 1993-1-8 deals with design of joints, but it does not cover the design of conical element for reduction of circular hollow section to the joint. Finite element method was used in this paper ...
متن کاملRetrofitting of Beam-Column Joint Using CFRP and Steel Plate
─This paper presents the retrofitting of beam-column joint using CFRP (Carbon Fiber Reinforced Polymer) and steel plate. This specimen was tested until failure up to 1.0% drift. This joint suffered severe damages and diagonal cracks at upper crack at upper column before retrofitted. CFRP were wrapped at corbel, bottom and top of the column. Steel plates with bonding were attached to the two bea...
متن کاملnumerical analysis of rc beams flexurally strengthened by cfrp laminates
this paper presents the results of analytical studies concerning the flexuralstrengthening of reinforced concrete beams by external bonding of high-strength lightweightcarbon fiber reinforced plastic (cfrp) plates to tension face of the beam. three groups of beamswere tested analytically and compared with existing experimental results. results of the numericalanalyses showed that, although addi...
متن کاملoptimal joint survival probability of xl reinsurance contracts in iran insurance company
اگر تنها یک صنعت جهت حفظ تعادل در بازار جهانی ضروری باشد، می توان ادعا نمود که آن صنعت بیمه است. صنعت بیمه بدون کمک صنعت بیمه اتکایی قادر به انجام وظیفه خویش نخواهد بود. اکثر تحقیقات انجام گرفته در زمینه بیمه اتکایی تنها با در نظر گرفتن منافع شرکت بیمه شده بوده است و منافع شرکت بیمه گر اتکایی کمتر مورد توجه بوده است. در این رساله با در نظر گرفتن منافع همزمان هر دو شرکت بیمه گذار اصلی و بیمه گر ...
15 صفحه اولPresentation and Analysis of Methods for Increasing Glue Joint Strength in the Same Length Joint
Glue joints are more useful in Aerospace so in this article we presented new method for glue joint. In this method the maximum stresses that occurs at the edges of the bottom glue joint and cause ultimate failure in this type of connection is Decrease and increase the glue joint strength. In this method glue in the area overlapping the discrete and separate column considered Also, the connectio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Concrete Technology
سال: 2009
ISSN: 1346-8014,1347-3913
DOI: 10.3151/jact.7.307