Nonhydrostatic compression of elastically anisotropic polycrystals. II. Direct compression and plastic deformation
نویسندگان
چکیده
منابع مشابه
Plastic Deformation in Laser-induced Shock Compression of Monocrystalline Copper
Copper monocrystals were subjected to shock compression at pressures of 10-60 GPa by a short (3 ns initial) duration laser pulse. Transmission electron microscopy revealed features consistent with previous observations of shock-compressed copper, albeit at pulse durations in the us regime. The results suggest that the defect structure is generated at the shock front. A mechanism for dislocation...
متن کاملThe Effect of Fe Additive on Plastic Deformation for Crush-Boxes with Closed-Cell Metal Foams, Part II: Al-Composite Foam-Filled brass tubes Compression Response
The brass tubes with foam cores of AlSi7SiC3, AlSi7SiC3Fe1 and AlSi7SiC3Fe3 were produced as the crush-boxes with circle and square cross-section. Then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. The uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...
متن کاملA Self-consistent Anisotropic Approach for the Simulation of Plastic Deformation and Texture Development of Polycrystals: Application to Zirconium Alloys
-We present in this work a visco-plastic self-consistent (VPSC) anisotropic approach for modeling the plastic deformation of polycrystals, together with a thorough discussion of the assumptions involved and the range of application of such approach. We use the VPSC model for predicting texture development during rolling and axisymmetric deformation of Zirconium alloys, and to calculate the yiel...
متن کاملMesoscale Modeling of Dynamic Compression of Boron Carbide Polycrystals
An anisotropic nonlinear elastic model is advanced for crystals belonging to either of two polytypes of boron carbide ceramic. Crystals undergo transformation to an isotropic, amorphous phase upon attainment of a local state-based criterion associated with a loss of intrinsic stability. The model is implemented using the dynamic finite element method, and is demonstrated on a representative vol...
متن کاملCombined Plastic Bending and Compression or Tension
So far we have assumed that a plastic hinge forms if the bending moment in a critical cross section reaches the plastic limit value, M0. We have tacitly neglected the effect of the other internal forces on the formation of the yield hinge. This effect, however, can be appreciable, for example in multi-storey frames or frames with a large horizontal thrust where the axial forces are large. So, w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physical Review B
سال: 1998
ISSN: 0163-1829,1095-3795
DOI: 10.1103/physrevb.57.3264