Nondestructive Testing Electrical Methods for Sensing Damages in Cement Mortar Beams

Nondestructive Monitoring of Setting and Hardening of Portland Cement Mortar with Sonic Methods

The setting and hardening process of concrete is considered to be the most critical time period during the life of a concrete structure. Previous research has been conducted on an ultrasonic wave reflection method that utilizes a steel plate embedded in the concrete to measure the reflection loss of shear waves at the steel-concrete interface. The reflection loss has been shown to have a linear...

Electrical Equivalent Analysis of Micro Cantilever Beams for Sensing Applications

Microcantilevers are the basic MEMS devices, which can be used as sensors, actuators and electronics can be easily built into them. The detection principle of microcantilever sensors is based on the measurement of change in cantilever deflection or change in its resonance frequency. The objective of this work is to explore the analogies between mechanical and electrical equivalent of microcanti...

Mechanical characterization of mortar beams

The mechanical characterization of mortars is problematic due to their sensitivity to stress concentration defects, namely pores and flaws. In this paper, data on three-point bending, Young’s modulus and fracture toughness of mortar beams are presented and discussed. Here, Weibull statistics is applied to analyse flexural strength of the developed mortar. Based on data obtained according to the...

Novel Integrated Nondestructive Testing Methodology for Detection and Evaluation of Corrosion in Cement-Based Materials

Nondestructive Evaluation of Damage in Beams Using Displacement Curvature

In this paper, the capabilities of displacement curvature derived from static response data for finding the location and severity of damage in Euler-Bernoulli beams are assessed. Static response of a beam is obtained using the finite element modeling. In order to reduce the number of measured nodal displacements, the beam deflection is fitted through a polynomial function using a limited number...