Nondestructive residual stress measurement in steel using magnetoacoustic interactions.
نویسندگان
چکیده
منابع مشابه
Residual Stress Measurement in Steel Beams Using the Incremental Slitting Technique
This paper examines the application of the incremental slitting technique for residual stress measurement to plastically deformed four-point bent beams and autogenously edge welded steel beams. Initially a study into a number of factors affecting the series expansion approach was conducted. Due to the over-determined nature of the series expansion approach appropriate selection of polynomial se...
متن کاملThermoelectric Nondestructive Evaluation of Residual Stress in Shot-Peened Metals
This paper presents a noncontacting thermoelectric method that can be used to characterize the prevailing residual stress in shot-peened specimens. This novel method is based on magnetic detection of local thermoelectric currents in the compressed near-surface layer of metals when a temperature gradient is established throughout the specimen. Besides the primary residual stress effect, the ther...
متن کاملOil STUDY OF ULTRASONIC METHODS FOR NONDESTRUCTIVE MEASUREMENT OF RESIDUAL STRESS
The study of streas-induced birefringence has been continued in both polycrystalline and single crystal experiments. The effect is explained on the basis of nonlinear elasticity theory. Experiments indicate that dislocation activity does not strongly affect results in polycrystalline specimens, however, a pronounced influence may be observed in single crystals. Nonlinear elasticity theory has b...
متن کاملDynamic Piezoresistivity Calibration for Eddy Current Nondestructive Residual Stress Measurements
It has been recently demonstrated [M. P. Blodgett and P. B. Nagy, J. Nondestruct. Eval. 23, 107 (2004)] that eddy current conductivity measurements can be exploited for near-surface residual stress assessment in surface-treated nickel-base superalloy components. To quantitatively assess the prevailing residual stress from eddy current conductivity measurements, the piezoresistivity coefficients...
متن کاملMeasurement of residual stress in quenched 1045 steel by the nanoindentation method
Article history: Received 12 September 2010 Accepted 27 September 2010 In this paper, the residual stress in quenched AISI 1045 steel was measured by a recently developed nanoindentation technique. Depth control mode was adopted to measure the residual stress. It was found that residual compressive stress was generated in the quenched steel. The material around nanoindents exhibits significant ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1990
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.56.2573