Nondestructive examination of recovery stage during annealing of a cold-rolled low-carbon steel using eddy current testing technique
نویسندگان
چکیده
منابع مشابه
Kinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel
In the current study, the recrystallization behavior of 75% cold-rolled Fe-22Mn-10Al-1.4C steel during annealing at 750, 770, 790, 810, and 830°C was studied. X-ray diffraction patterns and optical microscopy were used to characterize microstructures. The Vickers Micro-hardness test was used to characterize recrystallization kinetics during annealing. Johnson-Mehl-Avrami-Kolmogorov (JMAK) model...
متن کاملDesign of Nondestructive System for Hardness of Carbonitrided Steel Parts Using Eddy Current Testing Method: Case study on the Tappet Parts
In this paper, a non-destructive eddy current test system was designed to evaluate the surface hardness of the carbonitrided steel parts. For this purpose, various samples of the tappet were used after the surface hardening and grinding operations as control samples and, if necessary, were subjected to destructive and non-destructive tests. Microstructural studies were performed with a microsco...
متن کاملEddy Current Tomography for Nondestructive Testing
The paper presents an eddy current tomography setup with high spatial resolution and high accuracy of measurements of signal on detection coil. In proposed solution both amplitude as well as phase shift are measured, which gives the possibility of calculation of spatial distribution of both permeability and resistivity of tested element. As a result, presented setup creates possibility of effec...
متن کاملInverse Problem in Nondestructive Testing Using Arrayed Eddy Current Sensors
A fast crack profile reconstitution model in nondestructive testing is developed using an arrayed eddy current sensor. The inverse problem is based on an iterative solving of the direct problem using genetic algorithms. In the direct problem, assuming a current excitation, the incident field produced by all the coils of the arrayed sensor is obtained by the translation and superposition of the ...
متن کاملWork-Hardening and Deformation Mechanism of Cold Rolled Low Carbon Steel
The study reports the mechanical property and microstructure of cold rolled low carbon steel and its work-hardening behavior in the deformation process. The tensile test in room temperature of low carbon steel was implemented for the different cold rolling deformation, the stress-strain curve was draught according to the relationship between strength and deformation and fitted for the polynomia...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nondestructive Testing and Evaluation
سال: 2017
ISSN: 1058-9759,1477-2671
DOI: 10.1080/10589759.2017.1409746