Nondestructive Evaluation of Alumina-Fiber-Reinforced Epoxy.
نویسندگان
چکیده
منابع مشابه
Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملNondestructive Evaluation of Graphite/Epoxy Composite Damage
Ultrasonic and acoustic emission techniques were used to monitor and evaluate material damage in a graphite/epoxy laminate containing a machined hole as an initial flaw and subjected to fully reversed spectrum fatigue loading at room temperature. It was found that the flaw growth progressed radially around the initial hole at a uniform rate during cycling at the lower stress levels. At the high...
متن کاملImpact and Hardness Properties of Areca Fiber-Epoxy Reinforced Composites
Natural Fibers composites are considered to have potential use as reinforcing material in polymer matrix composites because of their good strength, stiffness, low cost, environmental friendly and biodegradable. In present study, mechanical properties for natural fiber composites were evaluated. Here, areca fiber is used as new natural fiber reinforcement and epoxy resin as matrix. The extracted...
متن کاملSolid particle erosion of Bagasse fiber reinforced epoxy composite
Experiments were carried out to study the effects of impingement angle and particle velocity on the solid particle erosion behavior of Bagasse Fiber Reinforced Polymer Composites (BFRPCs). The erosive wear is evaluated at different impingement angles from 30° to 90° at four different velocities of 48, 70, 82 and 109 m/s. The erodent used is silica sand with the size range 150 – 250 m of irregul...
متن کاملNondestructive Evaluation of Carbon Fiber Reinforced Polymer Composites Using Reflective Terahertz Imaging
Terahertz (THz) time-domain spectroscopy (TDS) imaging is considered a nondestructive evaluation method for composite materials used for examining various defects of carbon fiber reinforced polymer (CFRP) composites and fire-retardant coatings in the reflective imaging modality. We demonstrate that hidden defects simulated by Teflon artificial inserts are imaged clearly in the perpendicular pol...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 2000
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.66.1477