Nondestructive Detection of Valves Using Acoustic Emission Technique
نویسندگان
چکیده
منابع مشابه
Nondestructive Evaluation of Welding Crack Defects in Structural Component Of Track Crane Using Acoustic Emission Technique
On-line defects detection of structural component of track crane such as crane boom, outriggers, turntable and vehicle frame, is a difficult problem of nondestructive testing (NDT). In the present study, the usefulness of acoustic emission (AE) measurements for the detection of welding crack defects in the specimen made of HG70 steel, which is widely used for manufacturing structural component ...
متن کاملLeak detection and localization using acoustic emission technique
Article history: Received 6 April, 2015 Accepted 10 October 2015 Available online 11 October 2015 This article provides a method of acoustic emission (AE) technique to detect leakage in pipeline and locate the position of the leakage. The AE sensor is made of piezoelectric effect transducer to pick up the acoustic emission signal which is generated from the turbulent flow at the leak position. ...
متن کاملStudy of Damaged Zone around Circular Opening Using Acoustic Emission Technique
One of the methods used to investigate the damaged zone in rock structure is the acoustic emission method. This method is based on receiving the elastic waves that are produced by deformation and cracking of the rock mass around the underground excavation. In this research, a study is conducted on the rock samples by a numerical method to investigate the damaged zone caused by the excavat...
متن کاملA study of acoustic emission technique for concrete damage detection
A study of acoustic emission technique for concrete damage detection", Master's report,
متن کاملStudy of the Frictional Surface Damage Using Acoustic Emission Method
In this study, the change at rubbing surfaces has been investigated experimentally using an acoustic emission signal monitoring system. A steel ring is slipped on the surface of a metallic sheet to simulate frictional conditions. The mechanical disturbances caused by the movement of the ring produce stress waves propagating along the sheet surface. The out of plane displacement of the sheet su...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2015
ISSN: 1687-8434,1687-8442
DOI: 10.1155/2015/749371