NON-UNIFORMITY OF MICROSTRUCTURE AND MECHANICAL PROPERTIES IN HIGH STRENGTH LOW-CARBON STEEL HOT ROLLED COILS
نویسندگان
چکیده
منابع مشابه
Nanoscale co-precipitation and mechanical properties of a high-strength low-carbon steel
Nanoscale co-precipitation in a novel high-strength low-carbon steel is studied in detail after isothermal aging. Atom-probe tomography is utilized to quantify the co-precipitation of co-located Cu precipitates and M2C (M is any combination of Cr, Mo, Fe, or Ti) carbide strengthening precipitates. Coarsening of Cu precipitates is offset by the nucleation and growth of M2C carbide precipitate, r...
متن کاملInvestigation of microstructure and mechanical properties of low carbon steel sheets after severe plastic deformation in corrugation dies
Recently, bulk nano-structured materials produced by severe plastic deformation (SPD) have attracted scientists attention. Materials produced by SPD are of great importance because of (1) non-porous structure, (2) great mechanical properties such as high strength and toughness and (3) proper dimension for mechanical and physical testing. Several methods have been introduced for imposing the s...
متن کاملmicrostructure and mechanical properties of a low alloy high carbon steel processed by quenching and partitioning process
the quenching and partitioning (q&p;) process is a new heat treatment cycle to produce the third generation of advanced high strength steels based on diffusion of carbon from martensite to retained austenite phase. the application of this process for various steels leads to a remarkable combination of mechanical properties including high strength and good ductility. using this process in automo...
متن کاملHeat treatment and mechanical properties of low-carbon steel with dual-phase microstructure
Purpose: The aim of the paper is to design heat treatment conditions of dual-phase steel and to determine their influence on the structure and mechanical properties of steel. Design/methodology/approach: The heat treatment of the C-Mn steel in order to obtain a dual-phase ferritic – martensitic structure of desirable phase fractions was realized. To investigate the influence of heat treatment p...
متن کاملEvaluation of microstructure and mechanical properties of 410NiMo as an overlay layer on low alloy steel
The aim of this study is to reach an increased service life for parts using in sour environment by weld overlaying process. In this investigation, two successive layers of ER410NiMo were clad on low alloy steel substrates. To reduce the likelihood of Hydrogen Induced Cracking (HIC) and producing stable hydrogen traps, Post Weld Heat Treatment (PWHT) was conducted. Microstructural analysis, X-ra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Izvestiya Visshikh Uchebnykh Zavedenii. Chernaya Metallurgiya = Izvestiya. Ferrous Metallurgy
سال: 2015
ISSN: 2410-2091,0368-0797
DOI: 10.17073/0368-0797-2013-9-43-47