Non-Lithographic Silicon Micromachining Using Inkjet and Chemical Etching
نویسندگان
چکیده
منابع مشابه
Dry Etching Based Silicon Micromachining
The aim of this work is to demonstrate the “dry” etching based micro-fabrication technologies in the manufacturing of Single Crystal Silicon (SCS) for Micro-Electro/(Optical)-Mechanical-Systems (ME(O)MS). The ME(O)MS technology is very fast growing industry branch based often on the same silicon technology as integrated circuits. The process of plasma-dry etching is quite simple straightforward...
متن کاملWet-Chemical Etching and Cleaning of Silicon
A Introduction Research and manufacturing related to silicon devices, circuits, and systems often relies on the wet-chemical etching of silicon wafers. The dissolution of silicon using liquid solutions is needed for deep etching and micromachining, shaping, and cleaning. Also, wet-chemistries are often used for defect delineation in single crystal silicon materials. In this paper, a review of t...
متن کاملOptimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution
In this paper, the morphology of chemically etched silicon with various concentration is reported. The surface of Silicon (100) has pyramidal structures which can be used for anti-reflection applications in solar cells. Pyramidal structures can capture incident sun light therefore can enhance the efficiency of silicon solar cells. The structure of silicon pyramid was studied using scanni...
متن کاملA comprehensive review on convex and concave corners in silicon bulk micromachining based on anisotropic wet chemical etching
Wet anisotropic etching based silicon micromachining is an important technique to fabricate freestanding (e.g. cantilever) and fixed (e.g. cavity) structures on different orientation silicon wafers for various applications in microelectromechanical systems (MEMS). {111} planes are the slowest etch rate plane in all kinds of anisotropic etchants and therefore, a prolonged etching always leads to...
متن کاملChemical dry etching of silicon nitride and silicon dioxide using CF4/O2/N2 gas mixtures
The chemical dry etching of silicon nitride (Si3N4)and silicon nitride (SiO2) in a downstream plasma reactor using CF4, O2, and N2 has been investigated. A comparison of the Si3N4 and SiO2 etch rates with that of polycrystalline silicon shows that the etch rates of Si3N4 and SiO2 are not limited by the amount of fluorine arriving on the surface only. Adding N2 in small amounts to a CF4 /O2 micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Micromachines
سال: 2016
ISSN: 2072-666X
DOI: 10.3390/mi7120222