NON-DESTRUCTIVE EVALUATION FOR HORIZONTAL CRACKS IN EXISTING RC SLABS BY ANALYSIS-AIDED IMPACT ELASTIC-WAVE METHODS
نویسندگان
چکیده
منابع مشابه
Ect-data Fusion by the Independent Component Analysis for Non-destructive Evaluation of Metallic Slabs
The aim of this paper is to present an application of ICA to non-destructive evaluation by unsupervised data-fusion, which aims at discovering the flaws affecting a metallic slab. The signals acquired through an eddy-currentprobe for nondestructive evaluation purposes are affected by strong noise and disturbances due to the mechanical system that the probe is mounted on. The availability of mul...
متن کاملElastic Wave Scattering from Griffith Cracks
To model elastic wave scattering from fatigue cracks in metals, studies were conducted of wave scattering from artificial cracks using ultrasonic spectroscopy. The cracks are of two dimensional planar strips oriented at various angles and embedded in diffusion bonded titanium alloy. The crack is assumed to behave as a Griffith crack and expressions (derived by Achenbach1) to describe diffracted...
متن کاملStrengthening of Existing RC Two-Way Slabs using New Combined FRP fabric/rod Technique
This study presents the results of an experimental program to investigate the effectiveness of an innovative combined FRP technique using combination of externally bonded (EB) FRP fabrics and near surface mounted (NSM) FRP rods for flexural strengthening of existing reinforced concrete (RC) two-wayslabs with low clear cover thickness. Three full-scale RC slabs (1500×1500×120 mm) were tested und...
متن کاملElastic Wave Scattering by Rough Flaws and Cracks
The scattering of elastic waves by three dimensional rough flawa and cracks is analyzed using the T-matrix approach. The scattering cross section is obtained for spheroidal cavities with a periodically corrugated surface which may be used as a model for flaws with a rough surface. The dependence of the scattering cross section on the wavelength of the corrugations is studied as a function of th...
متن کاملNon-Destructive Evaluation of Depth of Surface Cracks Using Ultrasonic Frequency Analysis
Ultrasonic is one of the most common uses of a non-destructive evaluation method for crack detection and characterization. The effectiveness of the acoustic-ultrasound Structural Health Monitoring (SHM) technique for the determination of the depth of the surface crack was presented. A method for ultrasonic sizing of surface cracks combined with the time domain and frequency spectrum was adopted...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Modern Physics: Conference Series
سال: 2012
ISSN: 2010-1945,2010-1945
DOI: 10.1142/s2010194512003959