Non Conventional Machining of Al/Al2O3 Metal Matrix Composite
نویسندگان
چکیده
منابع مشابه
Selection of Optimum Parameters in Non Conventional Machining of Metal Matrix Composite
Aluminium metal matrix composites (AMMCs) are now gaining their usage in aerospace and automotive industries. Because of their inherent nature, difficult to machine, they find very little applications in other sectors. Even non traditional processes like Laser Jet Machining and Electro Discharge Machining result in significant sub surface damage to the work. In this paper, an attempt is made to...
متن کاملdevelopments in conventional machining of aluminum matrix composite material: a review
aluminium matrix composites (amcs) materials are continuously displacing traditional engineering materials because of their advantages of high stiffness and strength over homogeneous material formulations. properties of amcs can be tailored to the demands of different industrial applications by suitable combinations of matrix, reinforcement and processing route. presently, several grades of amc...
متن کاملA Review on Conventional and Laser Assisted Machining of Aluminium Based Metal Matrix Composites
Article history: Received: 27.6.2013. Received in revised form: 14.11.2013. Accepted: 19.11.2013. Aluminum based Metal Matrix Composites (AlMMC) have been found in different industrial applications due to their excellent properties compared to conventional materials. Machining of these composites is difficult due to their hard particle reinforcements. The wider usage of these composites is limi...
متن کاملInvestigation into Machining Characteristics of Tri- Alumane Zirconium Particle Reinforcement in Metal Matrix Composite Using Ultrasonic Machining Process
Particle reinforced metal matrix composites (PRMMCs) are the materials that are extremely difficult to machine using conventional manufacturing method due to high tool wear caused by presence of the hard ceramic reinforcement. This paper presents details of an investigation into the machinability of TriAlumane zirconium (Al3Zr), Zirconia (ZrO2) and Silicon carbide (SiC)particulate reinforcedalu...
متن کاملPARAMETRIC OPTIMIZATION OF Al-SiC12% METAL MATRIX COMPOSITE MACHINING BY ELECTRICAL DISCHARGE MACHINE
In the present study, pure aluminium alloy is mixed with 12% SiC on weight basis to fabricate the metal matrix composite (MMC) material. The objective of this paper is to investigate the effect of process parameters such as pulse on time(Ton), peak current (Ip) and flushing pressure (Fp) on metal removal rate (MRR), tool wear rate (TWR) and surface roughness (SR) during electrical discharge mac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2018
ISSN: 2321-9653
DOI: 10.22214/ijraset.2018.6171