منابع مشابه
Study of Low-Temperature-Combustion Diesel Engines
Fuel cells have been recognized as a feasible alternative to current IC engines. A significant technical problem yet to be resolved is the on bound fuel supply before fuel cells can be practically used for vehicles. Use of an on-board fuel reformer can mitigate the fuel supply issue. In particular, using a diesel engine as on-board fuel reformer, combined with a fuel cell, is a strong candidate...
متن کاملprediction of ignition delay period in d.i diesel engines
a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...
Modeling Low-Pressure Injections in Diesel HCCI Engines
Homogeneous Charge Compression Ignition (HCCI) combustion is being considered as an alternative to conventional engine combustion systems due to its high efficiency and low engine-out emissions. To prepare a homogeneous mixture for diesel HCCI combustion, two types of low pressure (5MPa~20MPa) injectors were considered: a swirl injector and a multi-hole injector. A modified version of the KIVA-...
متن کاملOptimization of Turbocharged Diesel Engines
The turbocharger and turbocharging have been the inherent component of diesel engines, so that critical parameters of such engines, as BSFC (Brake Specific Fuel Consumption) or thermal efficiency, fuel consumption, BMEP (Brake Mean Effective Pressure), the power density output and emission level have been improved extensively. In general, the turbocharger can be considered as the most complex c...
متن کاملIs Thermal Barrier Coating for Low Heat Rejection in SI Engines or Diesel Engines?
The diesel / gasoline engine rejects about two thirds of the heat energy of the fuel, one-third to the coolant, and one third to the exhaust, leaving only about one-third as useful power output. Theoretically if the heat rejected could be reduced, then the thermal efficiency would be improved, at least up to the limit set by the second law of thermodynamics. Low Heat Rejection (LHR) engines aim...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Marine Engineering
سال: 2009
ISSN: 1346-1427,1884-3778
DOI: 10.5988/jime.44.189